Skip to content
Snippets Groups Projects
Commit a2bed50f authored by Dan Stone's avatar Dan Stone
Browse files

hooks and water resovior

parent d582c849
No related branches found
No related tags found
No related merge requests found
Pipeline #397853 passed
docs/projects/Frame/Water0.jpg

47.3 KiB

docs/projects/Frame/Water3.jpg

29.7 KiB

docs/projects/Plate/Hook3.jpg

17.2 KiB

docs/projects/Plate/Hook4.jpg

23.2 KiB

......@@ -526,7 +526,33 @@ To ensure the spinner bowel does not fly out I need to add a hooks that will con
I decided to go with a simple 3D printed design
![](../projects/Plate/Hook1.jpg
![](../projects/Plate/Hook1.jpg)
Got them 3D printed
![](../projects/Plate/Hook3.jpg)
And istalled
![](../projects/Plate/Hook4.jpg)
## Box: Water reservoir
I had decided to use a square water container as the water reservoir
![](../projects/Frame/Water0.jpg)
I wanted to build a holder that will attached ot the back of the frame and hold the water bottle
![](../projects/Frame/Water1.jpg)
I added strong support to try and only connect it on the bottom rail
![](../projects/Frame/Water2.jpg)
And we are ready to print
![](../projects/Frame/Water3.jpg)
## Box: Water skirt and drainage
......@@ -542,7 +568,7 @@ Added the drainage slopes
![](../projects/Plate/waterskirt2.jpg)
Unfortuntaly my prusa is too small to print the whole things at one so I had to cut it to be printed in parts
Unfortunately my Prusa is too small to print the whole things at one so I had to cut it to be printed in parts
![](../projects/Plate/waterskirt3.jpg)
......
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment