diff --git a/docs/projects/Frame/Water0.jpg b/docs/projects/Frame/Water0.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..b9ea300aaf15c0c0bd5acf79edecd2fccaeec483
Binary files /dev/null and b/docs/projects/Frame/Water0.jpg differ
diff --git a/docs/projects/Frame/Water3.jpg b/docs/projects/Frame/Water3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..4757ecaa292ca457774f2134951b299d8c3ef62f
Binary files /dev/null and b/docs/projects/Frame/Water3.jpg differ
diff --git a/docs/projects/Plate/Hook3.jpg b/docs/projects/Plate/Hook3.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..3276988b359cd1229e3f4885c8911601f485e517
Binary files /dev/null and b/docs/projects/Plate/Hook3.jpg differ
diff --git a/docs/projects/Plate/Hook4.jpg b/docs/projects/Plate/Hook4.jpg
new file mode 100644
index 0000000000000000000000000000000000000000..e247bd4e5db79a02a99e32b444e4dd4267881b51
Binary files /dev/null and b/docs/projects/Plate/Hook4.jpg differ
diff --git a/docs/projects/final-project.md b/docs/projects/final-project.md
index f84dd7f25a6a2cb3ebe0d2135db5714d7e694ff4..071c57263e9b1c2300d21f512df5749238906da8 100644
--- a/docs/projects/final-project.md
+++ b/docs/projects/final-project.md
@@ -526,7 +526,33 @@ To ensure the spinner bowel does not fly out I need to add a hooks that will con
 
 I decided to go with a simple 3D printed design 
 
-![](../projects/Plate/Hook1.jpg
+![](../projects/Plate/Hook1.jpg)
+
+Got them 3D printed 
+
+![](../projects/Plate/Hook3.jpg)
+
+And istalled 
+![](../projects/Plate/Hook4.jpg)
+
+
+## Box: Water reservoir    
+
+I had decided to use a square water container as the water reservoir 
+
+![](../projects/Frame/Water0.jpg)
+
+I wanted to build a holder that will attached ot the back of the frame and hold the water bottle
+
+![](../projects/Frame/Water1.jpg)
+
+I added strong support to try and only connect it on the bottom rail 
+
+![](../projects/Frame/Water2.jpg)
+
+And we are ready to print 
+
+![](../projects/Frame/Water3.jpg)
 
 ## Box: Water skirt and drainage 
 
@@ -542,7 +568,7 @@ Added the drainage slopes
 
 ![](../projects/Plate/waterskirt2.jpg)
 
-Unfortuntaly my prusa is too small to print the whole things at one so I had to cut it to be printed in parts 
+Unfortunately my Prusa is too small to print the whole things at one so I had to cut it to be printed in parts 
 
 ![](../projects/Plate/waterskirt3.jpg)