f

docs/assignments/week09.md

@@ -345,11 +345,11 @@ Lef click on the set up and select post process
 
 ![](../images/imagW8/mill5.png)
 
-I used the GRBL output for the Genmitsu and got the needed .nc file  type 
+I used the GRBL output for the Genmitsu and got the needed .nc file  type. 
 
 ![](../images/imagW8/mill4.png)
 
-I loaded into the candle software for the cut and made sure the Zero out the Z using a paper. Making sure is hard to get out 
+I loaded into the candle software for the cut. Put in the 0.5mm endmill bit and made sure the Zero out the Z using a paper. Making sure is hard to get out 
 
 ![Cut](../images/imagW8/gincut6.jpg)