From 20218c392c00e931e208f36ec44be9e97ad1cb64 Mon Sep 17 00:00:00 2001
From: danjstone <dan@909street.com>
Date: Mon, 19 Jun 2023 13:23:11 -0400
Subject: [PATCH] f

---
 docs/assignments/week09.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/docs/assignments/week09.md b/docs/assignments/week09.md
index 32a4084..b36e1e7 100644
--- a/docs/assignments/week09.md
+++ b/docs/assignments/week09.md
@@ -345,11 +345,11 @@ Lef click on the set up and select post process
 
 ![](../images/imagW8/mill5.png)
 
-I used the GRBL output for the Genmitsu and got the needed .nc file  type 
+I used the GRBL output for the Genmitsu and got the needed .nc file  type. 
 
 ![](../images/imagW8/mill4.png)
 
-I loaded into the candle software for the cut and made sure the Zero out the Z using a paper. Making sure is hard to get out 
+I loaded into the candle software for the cut. Put in the 0.5mm endmill bit and made sure the Zero out the Z using a paper. Making sure is hard to get out 
 
 ![Cut](../images/imagW8/gincut6.jpg)
 
-- 
GitLab