SRM-20 mill PCB, inconsistent Z heights
I'm using an SRM-20 mill to cut PCBs.
The machine has the latest firmware and the VPanel is upgraded to the most recent version.
I'm using the modsproject.org site, and opening the 'SRM-20 mill -> PCB' program
ISSUE: I run the genarated .rml file and get an odd outcome.
The mill seems to run different paths at different Z heights off the board. It looks like it's milling the paths I expect to see in fresh air, not on the plane of Z minus my depth of cut.
I've attached the original .svg and the output .rml