fab.kicad_sym

    )
    (property "Value" "Sensor_Accelerometer_ADXL343" (at -7.62 -11.43 0)
      (effects (font (size 1.27 1.27)))
    )
    (property "Footprint" "fab:LGA-14_3x5mm" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL343.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "3-axis accelerometer i2c spi mems" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "3-Axis MEMS Accelerometer, 2/4/8/16g range, I2C/SPI, LGA-14" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*LGA*14*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_Accelerometer_ADXL343_0_1"
      (rectangle (start -10.16 10.16) (end 10.16 -10.16)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Sensor_Accelerometer_ADXL343_1_1"
      (pin power_in line (at 5.08 12.7 270) (length 2.54)
        (name "Vdd_I/O" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin no_connect line (at -5.08 -10.16 90) (length 2.54) hide
        (name "NC" (effects (font (size 1.27 1.27))))
        (number "10" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at 5.08 -12.7 90) (length 2.54)
        (name "RES" (effects (font (size 1.27 1.27))))
        (number "11" (effects (font (size 1.27 1.27))))
      )
      (pin bidirectional line (at -12.7 2.54 0) (length 2.54)
        (name "SDO/ADDR" (effects (font (size 1.27 1.27))))
        (number "12" (effects (font (size 1.27 1.27))))
      )
      (pin bidirectional line (at -12.7 0 0) (length 2.54)
        (name "SDA/SDI/SDIO" (effects (font (size 1.27 1.27))))
        (number "13" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -12.7 -2.54 0) (length 2.54)
        (name "SCL/SCLK" (effects (font (size 1.27 1.27))))
        (number "14" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 -12.7 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at -5.08 12.7 270) (length 2.54)
        (name "RES" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at 0 -12.7 90) (length 2.54) hide
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "4" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at 0 -12.7 90) (length 2.54) hide
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "5" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 12.7 270) (length 2.54)
        (name "Vs" (effects (font (size 1.27 1.27))))
        (number "6" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -12.7 -5.08 0) (length 2.54)
        (name "~{CS}" (effects (font (size 1.27 1.27))))
        (number "7" (effects (font (size 1.27 1.27))))
      )
      (pin output line (at 12.7 0 180) (length 2.54)
        (name "INT1" (effects (font (size 1.27 1.27))))
        (number "8" (effects (font (size 1.27 1.27))))
      )
      (pin output line (at 12.7 -2.54 180) (length 2.54)
        (name "INT2" (effects (font (size 1.27 1.27))))
        (number "9" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Sensor_HallEffect_Analog_A1324LLHLT-T" (in_bom yes) (on_board yes)
    (property "Reference" "U" (at -5.08 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Value" "Sensor_HallEffect_Analog_A1324LLHLT-T" (at 1.27 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Footprint" "fab:SOT-23-3" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.allegromicro.com/~/media/Files/Datasheets/A1324-5-6-Datasheet.ashx" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "Hall Effect Sensor Single Axis SOT-23W" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "SENSOR HALL EFFECT ANALOG SOT23W" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*SOT*23W*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_HallEffect_Analog_A1324LLHLT-T_0_1"
      (rectangle (start 5.08 7.62) (end -5.08 -7.62)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Sensor_HallEffect_Analog_A1324LLHLT-T_1_1"
      (pin power_in line (at 0 10.16 270) (length 2.54)
        (name "VDD" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin open_collector line (at 7.62 0 180) (length 2.54)
        (name "OUTPUT" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Sensor_HallEffect_Diodes_AH49EN" (in_bom yes) (on_board yes)
    (property "Reference" "U" (at -5.08 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Value" "Sensor_HallEffect_Diodes_AH49EN" (at 1.27 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Footprint" "fab:SOT-23-3" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.diodes.com/assets/Datasheets/AH49E.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "Hall Effect Sensor Single Axis SOT-23-3" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "SENSOR HALL ANALOG SOT23-3" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*SOT*23W*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_HallEffect_Diodes_AH49EN_0_1"
      (rectangle (start 5.08 7.62) (end -5.08 -7.62)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Sensor_HallEffect_Diodes_AH49EN_1_1"
      (pin power_in line (at 0 10.16 270) (length 2.54)
        (name "VDD" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin open_collector line (at 7.62 0 180) (length 2.54)
        (name "OUTPUT" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Sensor_HallEffect_XYZ" (in_bom yes) (on_board yes)
    (property "Reference" "U" (at -5.08 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Value" "Sensor_HallEffect_XYZ" (at 1.27 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Footprint" "fab:TSOT-23-6" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://media.digikey.com/pdf/Data%20Sheets/Infineon%20PDFs/TLE493D-A2B6_V1.3_4-9-19.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "hall effect i2c sensor xyz" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Low Power 3D Hall Sensor with I2C Interface" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*TSOT*23*6*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_HallEffect_XYZ_0_1"
      (rectangle (start 5.08 7.62) (end -5.08 -7.62)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Sensor_HallEffect_XYZ_1_1"
      (pin input line (at -7.62 0 0) (length 2.54)
        (name "SCL" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at -2.54 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 10.16 270) (length 2.54)
        (name "VDD" (effects (font (size 1.27 1.27))))
        (number "4" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 2.54 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "5" (effects (font (size 1.27 1.27))))
      )
      (pin bidirectional line (at 7.62 0 180) (length 2.54)
        (name "SDA" (effects (font (size 1.27 1.27))))
        (number "6" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Sensor_LaserRanging_ToF_200cm_I2C_VL53L0X" (in_bom yes) (on_board yes)
    (property "Reference" "U" (at -12.7 13.97 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Value" "Sensor_LaserRanging_ToF_200cm_I2C_VL53L0X" (at 3.81 13.97 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Footprint" "fab:ST_VL53L0X" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.st.com/content/ccc/resource/technical/document/datasheet/group3/b2/1e/33/77/c6/92/47/6b/DM00279086/files/DM00279086.pdf/jcr:content/translations/en.DM00279086.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "lidar laser rangefinder optical sensor" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Time-of-Flight laser-ranging module 200cm I²C Output, ST, VL53L0X" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*ST*VL53L0X*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_LaserRanging_ToF_200cm_I2C_VL53L0X_0_0"
      (rectangle (start -12.7 12.7) (end 12.7 -12.7)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
      (pin power_in line (at -2.54 17.78 270) (length 5.08)
        (name "AVDDVCSEL" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin input clock (at -17.78 -7.62 0) (length 5.08)
        (name "SCL" (effects (font (size 1.27 1.27))))
        (number "10" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 2.54 17.78 270) (length 5.08)
        (name "AVDD" (effects (font (size 1.27 1.27))))
        (number "11" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 5.08 -17.78 90) (length 5.08)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "12" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 17.78 270) (length 5.08)
        (name "AVSSVCSEL" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at -2.54 -17.78 90) (length 5.08)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 -17.78 90) (length 5.08)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "4" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -17.78 7.62 0) (length 5.08)
        (name "XSHUT" (effects (font (size 1.27 1.27))))
        (number "5" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 2.54 -17.78 90) (length 5.08)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "6" (effects (font (size 1.27 1.27))))
      )
      (pin output line (at 17.78 7.62 180) (length 5.08)
        (name "GPIO1" (effects (font (size 1.27 1.27))))
        (number "7" (effects (font (size 1.27 1.27))))
      )
      (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)
        (name "SDA" (effects (font (size 1.27 1.27))))
        (number "9" (effects (font (size 1.27 1.27))))
      )
    )
    (symbol "Sensor_LaserRanging_ToF_200cm_I2C_VL53L0X_0_1"
      (pin no_connect line (at 17.78 -7.62 180) (length 5.08) hide
        (name "DNC" (effects (font (size 1.27 1.27))))
        (number "8" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Sensor_Pressure_DPS310" (in_bom yes) (on_board yes)
    (property "Reference" "U" (at -7.62 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Value" "Sensor_Pressure_DPS310" (at 1.27 8.89 0)
      (effects (font (size 1.27 1.27)) (justify left))
    )
    (property "Footprint" "fab:VFLGA-8_2x2.5mm" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.infineon.com/dgdl/Infineon-DPS310-DS-v01_00-EN.pdf?fileId=5546d462576f34750157750826c42242" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "capacitive pressure sensor vented gauge lga" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Pressure Sensor 4.35PSI ~ 17.4PSI (30kPa ~ 120kPa) Vented Gauge  24 b 8-VFLGA" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*VFLGA*8*2x2.5mm*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Sensor_Pressure_DPS310_0_1"
      (rectangle (start -7.62 7.62) (end 7.62 -7.62)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Sensor_Pressure_DPS310_1_1"
      (pin power_in line (at 0 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -10.16 0 0) (length 2.54)
        (name "CSB" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at 10.16 2.54 180) (length 2.54)
        (name "SDI" (effects (font (size 1.27 1.27))))
        (number "3" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -10.16 -2.54 0) (length 2.54)
        (name "SCK" (effects (font (size 1.27 1.27))))
        (number "4" (effects (font (size 1.27 1.27))))
      )
      (pin output line (at 10.16 0 180) (length 2.54)
        (name "SDO" (effects (font (size 1.27 1.27))))
        (number "5" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at -2.54 10.16 270) (length 2.54)
        (name "VDDIO" (effects (font (size 1.27 1.27))))
        (number "6" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 2.54 -10.16 90) (length 2.54)
        (name "GND" (effects (font (size 1.27 1.27))))
        (number "7" (effects (font (size 1.27 1.27))))
      )
      (pin power_in line (at 0 10.16 270) (length 2.54)
        (name "VDD" (effects (font (size 1.27 1.27))))
        (number "8" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Speaker" (pin_names (offset 0) hide) (in_bom yes) (on_board yes)
    (property "Reference" "LS" (at 1.27 6.35 0)
      (effects (font (size 1.27 1.27)) (justify right))
    )
    (property "Value" "Speaker" (at 1.27 3.81 0)
      (effects (font (size 1.27 1.27)) (justify right))
    )
    (property "Footprint" "fab:PinHeader_1x02_P2.54mm_Horizontal_SMD" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "~" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "speaker sound loudspeaker buzzer" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Generic sound device" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*1x02*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Speaker_0_0"
      (rectangle (start -1.27 2.54) (end 1.27 -2.54)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
      (polyline
        (pts
          (xy 1.27 2.54)
          (xy 3.81 5.08)
          (xy 3.81 -5.08)
          (xy 1.27 -2.54)
        )
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
    )
    (symbol "Speaker_1_1"
      (pin input line (at -3.81 1.27 0) (length 2.54)
        (name "1" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin input line (at -3.81 -1.27 0) (length 2.54)
        (name "2" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Thermistor_NTC" (pin_numbers hide) (pin_names (offset 0)) (in_bom yes) (on_board yes)
    (property "Reference" "TH" (at -3.81 0 90)
      (effects (font (size 1.27 1.27)))
    )
    (property "Value" "Thermistor_NTC" (at 2.54 0 90)
      (effects (font (size 1.27 1.27)))
    )
    (property "Footprint" "fab:R_1206" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "https://www.mouser.fi/datasheet/2/18/AAS-920-324F-Thermometrics-NTC-SMD-032717-web-1018802.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "thermistor NTC resistor sensor" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Temperature dependent resistor, Amphenol NHQ103B375T10, negative temperature coefficient, NTC Thermistor 10k 1206 (3216 Metric)" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*1206*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Thermistor_NTC_0_1"
      (arc (start -3.048 2.159) (mid -3.0505 2.3165) (end -3.175 2.413)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -3.048 2.159) (mid -2.9736 1.9794) (end -2.794 1.905)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -3.048 2.794) (mid -2.9736 2.6144) (end -2.794 2.54)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 1.905) (mid -2.6144 1.9794) (end -2.54 2.159)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 2.54) (mid -2.434 2.5608) (end -2.159 2.794)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 3.048) (mid -2.9736 2.9736) (end -3.048 2.794)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.54 2.794) (mid -2.6144 2.9736) (end -2.794 3.048)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (rectangle (start -1.016 2.54) (end 1.016 -2.54)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
      (polyline
        (pts
          (xy -2.54 2.159)
          (xy -2.54 2.794)
        )
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (polyline
        (pts
          (xy -1.778 2.54)
          (xy -1.778 1.524)
          (xy 1.778 -1.524)
          (xy 1.778 -2.54)
        )
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (polyline
        (pts
          (xy -2.54 -3.683)
          (xy -2.54 -1.397)
          (xy -2.794 -2.159)
          (xy -2.286 -2.159)
          (xy -2.54 -1.397)
          (xy -2.54 -1.651)
        )
        (stroke (width 0) (type default))
        (fill (type outline))
      )
      (polyline
        (pts
          (xy -1.778 -1.397)
          (xy -1.778 -3.683)
          (xy -2.032 -2.921)
          (xy -1.524 -2.921)
          (xy -1.778 -3.683)
          (xy -1.778 -3.429)
        )
        (stroke (width 0) (type default))
        (fill (type outline))
      )
    )
    (symbol "Thermistor_NTC_1_1"
      (pin passive line (at 0 5.08 270) (length 2.54)
        (name "~" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at 0 -5.08 90) (length 2.54)
        (name "~" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
    )
  )
  (symbol "Thermistor_RTD" (pin_numbers hide) (pin_names (offset 0)) (in_bom yes) (on_board yes)
    (property "Reference" "TH" (at -3.81 0 90)
      (effects (font (size 1.27 1.27)))
    )
    (property "Value" "Thermistor_RTD" (at 2.54 0 90)
      (effects (font (size 1.27 1.27)))
    )
    (property "Footprint" "fab:R_1206" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "Datasheet" "http://www.vishay.com/docs/28899/ptsat.pdf" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_keywords" "thermistor resistor sensor RTD" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_description" "Temperature dependent resistor, Vishay PTS1206M1B1K00P100, 1 kOhms RTD Platinum ±0.3K ±3850ppm/°C -55°C ~ 175°C 1206 (3216 Metric)" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (property "ki_fp_filters" "*1206*" (at 0 0 0)
      (effects (font (size 1.27 1.27)) hide)
    )
    (symbol "Thermistor_RTD_0_1"
      (arc (start -3.048 2.159) (mid -3.0505 2.3165) (end -3.175 2.413)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -3.048 2.159) (mid -2.9736 1.9794) (end -2.794 1.905)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -3.048 2.794) (mid -2.9736 2.6144) (end -2.794 2.54)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 1.905) (mid -2.6144 1.9794) (end -2.54 2.159)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 2.54) (mid -2.434 2.5608) (end -2.159 2.794)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.794 3.048) (mid -2.9736 2.9736) (end -3.048 2.794)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (arc (start -2.54 2.794) (mid -2.6144 2.9736) (end -2.794 3.048)
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (rectangle (start -1.016 2.54) (end 1.016 -2.54)
        (stroke (width 0.254) (type default))
        (fill (type background))
      )
      (polyline
        (pts
          (xy -2.54 2.159)
          (xy -2.54 2.794)
        )
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (polyline
        (pts
          (xy -1.778 2.54)
          (xy -1.778 1.524)
          (xy 1.778 -1.524)
          (xy 1.778 -2.54)
        )
        (stroke (width 0) (type default))
        (fill (type none))
      )
      (polyline
        (pts
          (xy -2.54 -3.683)
          (xy -2.54 -1.397)
          (xy -2.794 -2.159)
          (xy -2.286 -2.159)
          (xy -2.54 -1.397)
          (xy -2.54 -1.651)
        )
        (stroke (width 0) (type default))
        (fill (type outline))
      )
      (polyline
        (pts
          (xy -1.778 -1.397)
          (xy -1.778 -3.683)
          (xy -2.032 -2.921)
          (xy -1.524 -2.921)
          (xy -1.778 -3.683)
          (xy -1.778 -3.429)
        )
        (stroke (width 0) (type default))
        (fill (type outline))
      )
    )
    (symbol "Thermistor_RTD_1_1"
      (pin passive line (at 0 5.08 270) (length 2.54)
        (name "~" (effects (font (size 1.27 1.27))))
        (number "1" (effects (font (size 1.27 1.27))))
      )
      (pin passive line (at 0 -5.08 90) (length 2.54)
        (name "~" (effects (font (size 1.27 1.27))))
        (number "2" (effects (font (size 1.27 1.27))))
      )
    )
  )
)