@@ -177,5 +177,11 @@ We will use a modified version of the FTDI chip board and slave motor boards, al
The node board we are going to base off ATtiny1614 basic design that can be found [here](http://academy.cba.mit.edu/classes/embedded_programming/index.html).
.
## Notes on Milling Fine Traces
Climb versus Conventional in Mods.
**Climb** is the default in Mods and it leaves a cleaner finish, but it causes problems with the 25mil pitch parts such as the FTDI chip board we will be using this year.
**Conventional** leaves a rough finish and is not as precise as Climb. However **it is better for the 25mil pitch parts** as it does not pull the smaller copper pads off.
