week7,13 updated

docs/assignments/week07.md

@@ -53,7 +53,7 @@ Regarding 3d printing on fabric, I was inspired by [Dinish Kumar's works](https:
 
 - Filament: PLA, TPU
 
-- [Fusion360](https://www.autodesk.com/products/fusion-360/overview?term=1&tab=subscription): Mesh repaire
+- [Fusion360](https://www.autodesk.com/products/fusion-360/overview?term=1&tab=subscription): Mesh repair
 	
 
 ## Process and workflow
@@ -88,7 +88,7 @@ After completing the design, it was exported as STL file. The step is as follows
 I used Prusa Slicer to make Gcode.       
 - Add the stl model into the Prusa slicer    
 
-- There are many settings. The example is below. The fillament was PLA, the setting of heatbed was 65°, extruder was 215°.     
+- There are many settings. The example is below. The filament was PLA, the setting of heatbed was 65°, extruder was 215°.     
 
 ![](../images/week07/img13.jpg){width=100%"}     
 
@@ -233,4 +233,3 @@ Pattern4: Coral [Grasshopper](../files/week07/Pattern4_Coral.gh)
 
 
 
-

docs/assignments/week13.md

@@ -100,7 +100,6 @@ Four-winged robot that flies with solar batteries
 
 <img src="https://onlinelibrary.wiley.com/cms/asset/0c7532ee-71d8-453a-b0a2-a557e2eb74b7/advs4996-fig-0004-m.jpg" width="70%">   
 
-![](http://www.mech.utsunomiya-u.ac.jp/fel/Tanpopo.gif){ width="30%"}   
 
 ## References & Inspiration
 ### Art & Environment