@@ -55,23 +55,24 @@ The project explores the possibilities to create relief surfaces and three-dimen
1. Open KeyPad by hitting the K letter on your keyboard. You can control the position of the x and y axis by the arrow keys. (Left and right arrows for changing the x-axis.Up and down arrows for changing the y-axis.)
1. Open KeyPad by hitting the K letter on your keyboard. You can control the position of the x and y axis by the arrow keys. (Left and right arrows for changing the x-axis.Up and down arrows for changing the y-axis.)
2. Homing x and y axis by pressing Zero (2) axes (X&Y).
2. Homing x and y axis by pressing Zero (2) axes (X&Y).
3. You can change the position of the z axis by the page up and page down keys.
3. You can change the position of the z axis by the page up and page down keys.
4. To zero your z-axis, bring the metal plate underneath your miling bit.
4. To zero your z-axis, bring the metal plate underneath your miling bit.
5. Touch the metal plate to the miling bit to check if inp 1 flashes green to make sure the miling bit will stop when it touches the plate.
5. Touch the metal plate to the miling bit to check if inp 1 flashes green to make sure the miling bit will stop when it touches the plate.
6. Lower the z axis a little bit and make sure the plate is exactly underneath the miling bit.
6. Lower the z axis a little bit and make sure the plate is exactly underneath the miling bit.
7. Hit the Zero Z button for zeroing the z-axis.
7. Hit the Zero Z button for zeroing the z-axis.
8. Bring your x and y axis to desired job origin. Take note of the positions of your home x and y axis because it helps you to go back to job origin.
8. Bring your x and y axis to desired job origin. Take note of the positions of your home x and y axis because it helps you to go back to job origin.
9. Zeroing the x and y axes by selecting Zero (2) axes (X&Y).The X and Y axis in the position pane is now 0,000. This is where your job will begin.
9. Zeroing the x and y axes by selecting Zero (2) axes (X&Y).The X and Y axis in the position pane is now 0,000. This is where your job will begin.
