Update 6 files

- /docs/images/week02/Screenshot 2023-10-03 130304.png
- /docs/images/week02/JiawenGong-0.dxf
- /docs/images/week02/JiawenGong-1.dxf
- /docs/images/week02/JiawenGong-2.dxf
- /docs/images/week02/jiawen.obj
- /docs/assignments/week02.md

docs/assignments/week02.md

 # 02  **DIGITAL BODIES**
 
-## **Research**
+## **RESEARCH**
 
 Here are some artists whose names I took note of during the global lecture. I've encountered [Antony Gormley](https://www.antonygormley.com/)'s work online many times. The British sculptor creates abstract human forms with steel and gemotric shapes. On the other hand, [Claudia Fontes](https://claudiafontes.com/)'s sculptures are softer and more organic. She creates these creatures from the fairytales with white procelain. They gently hug themselves, or each other, portraying the intimate and unseperable relationships between human and nature.
 
@@ -42,14 +42,20 @@ Less features on the human means less polygons, which reduces the size of the fi
 
 ![artists](../images/week02/mh.jpg){ width=1000 }
 
+## **SLICER**
+
+Slicer translates a 3D file into 2D, prepare it for laser cutting. Be careful with the red parts. It means some parts may not be able to stand or hold.
+
+![artists](../images/week02/Screenshot%202023-10-03%20130304.png){ width=1000 }
+
 ## **LASER CUTTING**
 
 A scary-looking machine but only does what you ask it to do.
 
-**NOTES:**
+**Notes:**
 
  --- 
-**SPEED AND POWER:**
+**SPEED AND POWER**
 
 Higher speed = faster laser cutting, resulting in a lower laser exposure (may cause cuts being too shallow or smoked edges)
 Higher power = deeper laser cutting
@@ -67,6 +73,7 @@ If you are doing both engraving and cutting, **do the engraving first** because
  --- 
 
 **Important Procedures**
+
   1. Delete duplicates
   2. Select open surface
   3. Close open surface
@@ -79,6 +86,7 @@ If you are doing both engraving and cutting, **do the engraving first** because
  --- 
 
 **Remember**
+
   1. Machine runs faster horizontally, so it's better to place the image in landscape
   2. Check if the material lays flat, if not, use weights or tape. When using weights, do a frame test to make sure they are not in the way. 
   3. Keep the cover closed for a few minutes when the job is done, and let ventilation does the job to prevent heavy smoke and smell.
@@ -104,6 +112,7 @@ My body consumes 2 and half 3mm thick cardboards that are 115cm by 95cm.
  --- 
 
 **Settings for the laser cut:** 
+
 Engraving: 50/15
 Cutting:30/40
 
@@ -122,7 +131,7 @@ I used some toothpicks as guidance for alignment and glued the cardboards togeth
 ![artists](../images/week02/final.jpg){ width=1000 }
 
 
-## TOOLS
+## **TOOLS**
  [TinyPNG](https://tinypng.com/)
  [Skanect](https://skanect.structure.io)
  [SENSE](https://support.3dsystems.com/s/article/Sense-Scanner?language=en_US)
@@ -130,9 +139,9 @@ I used some toothpicks as guidance for alignment and glued the cardboards togeth
  [RHINECEROS 3D](https://www.rhino3d.com/)
  [MAKEHUMAN](http://www.makehumancommunity.org/content/downloads.html)
 
-## FABRICATION FILES
-
-[^1]: File: [3d modelling of mannequin](../images/week02/testfile.stl)
-[^2]: File: Laser cut sheets
-[^3]: File: additional models
+## **FABRICATION FILES**
 
+[^1]: File: [Rhinceros 3D file](../images/week02/jiawen.obj)
+[^2]: File: [Laser cut sheets](../images/week02/JiawenGong-0.dxf)
+[^3]: File: [Laser cut sheets](../images/week02/JiawenGong-1.dxf)
+[^4]: File: [Laser cut sheets](../images/week02/JiawenGong-2.dxf)
\ No newline at end of file