@@ -73,6 +73,13 @@ This diagram helps me to design the circuit and how everything should be conncet
Tips for powering the neopixel flora:
1.When connecting NeoPixels to any live power source or microcontroller, ALWAYS CONNECT GROUND (–) BEFORE ANYTHING ELSE. Conversely, disconnect ground last when separating.
2.Adding a 300 to 500 Ohm resistor between your microcontroller's data pin and the data input on the first NeoPixel can help prevent voltage spikes that might otherwise damage your first pixel. Please add one between your micro and NeoPixels.
### **CRICUT MAKER 3**
I drew the circuit on rhino and cut it out on a piece of conductive fabric with Cricut. It looked really nice at first but **once I started soldering, the fabric melted** and was not usable anymore. So conductive fabric is not recommended for soldering.
