week06.md

OVERVIEW MATERIAL RESEARCH OUTCOMES

Gelatin Foil	Agar Foil	Alginate Foil	CMC
Bio Foam	Bio Resin	Bio Foam	Alginate foil

MATERIALITY

Material pic	Material name	Polymer	Plastifier	Water	Emulsifier	Hardness	Flexibility	Stretchiness	Transparancy
	Bio Resin	Gelatin 48gr	Glycerine 8gr	240ml	None	Hard	Bendable	None	Transparent
	Agar Foil	Agar 4gr	Glycerine 3gr	400ml	None	Soft	Bendable	Slightly	Opaque
	Agar+Gelatin Foil	Agar 3gr Gelatin 20gr	glycerol 15 ml	400ml	None	Crispy	Bendable	Stretchy	Opaque
	Bio Foam	Gelatin 48gr	Glycerine 8gr	240ml	None	Hard	Bendable	None	Transparent
	Bio Foam	Gelatin 48gr	Glycerine 8gr	240ml	Soap 1 tbsp	Medium	Bendable	None	None

GELATIN

BIO FOAM

How To:

1. Warm up the water in a pot on your stove.

2. Add your plasticiser, the glycerine will bond with the gelatin.

3. Add the gelatin.

4. Mix gently the ingredients until they form a smooth mix. Agar can take longer to fully dissolve, if the mix is not smooth, add a gentle heat at 60C to make sure the ingredients mix.

5. Add a table spoon of dishwashing soap to the mixture.

6. Simmer for 10-15 minutes (80C max) Whisking constantly.

7. Prepare the surface and molds.

8. For colouring, prepare your colours in a jar or a small container, to which you will add the mixture once it's ready for casting.

9. Once your mixture has thickened, almost like a syrup, pour on your chosen surface. Once start pouring, try to cast slowly, without inglobating air, and by carefully pouring on the liquid itself.

10. Let the mould dry in a ventilated and dry room, turninng your piece until its dry will help you preventing mould formation, but might affect deformaton due to water loss.

Filler	Pigment
None	Blue Ink

BIO FOAM WITHOUT SOAP

Filler	Pigment
Eggshells	None

BIO RESIN

How To:

1. Warm up the water in a pot on your stove.

2. Add your plasticiser, the glycerine will bond with the gelatin.

3. Add the gelatin.

4. Mix gently the ingredients until they form a smooth mix.

5. Simmer for 10-15 minutes (80C max)

6. Prepare the surface and molds.

7. For colouring, prepare your colours in a jar or a small container, to which you will add the mixture once it's ready for casting.

8. Once your mixture has thickened, almost like a syrup, pour on your chosen surface. Once start pouring, try to cast slowly, without inglobating air, and by carefully pouring on the liquid itself.

9. Let the mould dry in a ventilated and dry room, turninng your piece until its dry will help you preventing mould formation, but might affect deformaton due to water loss.

Filler	Pigment
Sea Shells	None

Filler	Pigment
Coffee, Weld	Blue Ink

AGAR

AGAR FOIL

How To:

1. Warm up the water in a pot on your stove.

2. Add your plasticiser, the glycerine will bond with the Agar.

3. Add the Agar.

4. Mix gently the ingredients until they form a smooth mix. Agar can take longer to fully dissolve, if the mix is not smooth, add a gentle heat at 60C to make sure the ingredients mix.

5. Simmer for 20 minutes (80C max)

6. Prepare the surface and molds. Due to the large amount of water needed for dissolving agar, the casted plastic will shrink both in thickness and width.

7. For colouring, prepare your colours in a jar or a small container, to which you will add the mixture once it's ready for casting.

8. Once your mixture has thickened, almost like a syrup, pour on your chosen surface. Once start pouring, try to cast slowly, without inglobating air, and by carefully pouring on the liquid itself.

9. Let the mould dry in a ventilated and dry room,with agar it is necessary to keep the piece in the mould for a smooth effect.

Filler	Pigment
Seashells, Coffee	Tumeric Powder

Filler	Pigment
Bamboo Leaves	Charchoal

AGAR AND GELATIN FOIL

1. Warm up the water in a pot on your stove.

2. Add your plasticiser, the glycerine will bond with the Agar and Gelatin

3. Add the Agar and Gelatin.

4. Mix gently the ingredients until they form a smooth mix. Agar can take longer to fully dissolve, if the mix is not smooth, add a gentle heat at 60C to make sure the ingredients mix.

5. Simmer for 20 minutes (80C max)

6. Prepare the surface and molds. Due to the large amount of water needed for dissolving agar, the casted plastic will shrink both in thickness and width.

7. For colouring, prepare your colours in a jar or a small container, to which you will add the mixture once it's ready for casting.

8. Once your mixture has thickened, almost like a syrup, pour on your chosen surface. Once start pouring, try to cast slowly, without inglobating air, and by carefully pouring on the liquid itself.

9. Let the mould dry in a ventilated and dry room,with agar it is necessary to keep the piece in the mould for a smooth effect.

Filler	Pigment
Coffee	Purple Ink

Filler	Pigment
Wool	Tumeric Powder

ALGINATE

||||||

Material pic	Polymer	Plastifier	Water	Emulsifier	Transparancy
	Alginate 30gr	Glycerine 100ml	1lt	None	Transparent
	Alginate 60gr	Glycerine 100ml	1lt	Sunflower Oil 50g	Opaque

Curing Solution

Calcium Chloride	1 0g	Water	100ml

ALGINATE YARN

ALGINATE BIOPLASTICS

FISH LEATHER

LOTTA RAHME on FISH LEATHER TANNING

KOMBUCHA

Tools

- [slides](http://class.textile-academy.org)
- [sources](http://class.textile-academy.org)
- [pots, jars...](http://class.textile-academy.org)
- [spoon, tongs, wisk etc](http://class.textile-academy.org)
- [molds, textiles, textures, etc](http://class.textile-academy.org)

TEST SERIE BIO-PLASTIC

Material pic	Material name	polymer	plastifier	filler	emulsifier
	bio-rainbow	biokelp powder 12 gr	glycerol 100 ml	rainbow dust 1 kg	green soap a drop
	bio-rainbow	biokelp powder 12 gr	glycerol 100 ml	rainbow dust 1 kg	green soap a drop
	bio-rainbow	biokelp powder 12 gr	glycerol 100 ml	rainbow dust 1 kg	green soap a drop
	bio-rainbow	biokelp powder 12 gr	glycerol 100 ml	rainbow dust 1 kg	green soap a drop