Week 08 : electronic design
Hi Charlotte,
Very nice week in alignment with your final project
A few notes :
- using adapter is ok. It should be feasible to use the chips in SMD directly though. A good reason to use adapter/connectors is when you use a complex or expensive chip that you want to re-use on future boards (so you can just unplug/plug it). I would even recommend using the female connector on the chip and male connector on the board in that purpose as female connectors are more complex and expensive. Just my two cents ^^. It's unclear whether you had time to test some code on this board?
- As you smartly use your weeks to develop your final project, don't hesitate to maintain your project's page documentation by linking to the different development stages :-).
Keep going!