Scan done

docs/assignments/week06.md

@@ -74,17 +74,69 @@ An here you can see the print in place piece all moving independently
 <iframe width="560" height="315" src=../../images/ImagW5/Rings.mp4 frameborder="0" allowfullscreen></iframe>  
 
 
-I finally wanted a little bit smoother and decided to use 2 functions in Prusa slicer "Iron" and variable Layer width 
 
-![Iron](../images/ImagW5/15iron.jpg)
+## 3D Scanning
 
-![Variable layers](../images/ImagW5/16multilayer.jpg)
+This was a bit more of an issue and having decided to use my phone as a starting point i trying a number of apps
 
+I tried SCANN3D and Polycam 
 
+For the SCANN3D I have tried 2 different objects and 
 
-## 3D Scanning
+# SCANN3D 
+1. Clementine / Stainless steel jar - Fail 
 
-This was a bit more of an issue and having decided to use my phone as a starting point i trying a number of apps
+At first I thought it was going ok but then if started failing 
+
+![SCANN3D](../images/ImagW5/Scan1.jpg)
+
+![Fail](../images/ImagW5/SCAN2.jpg)
+
+and then started crashing 
+
+![Crash](../images/ImagW5/SCAN3.jpg)
+
+Given I following the instruction in detail I decided to try another app before spending too much time on this one
+
+
+2. Polycam - first tried to scan a remote control but never got enough of the Z and it merged into the 
+ground  
+
+In this app, you choose to add a capture and then you slowly take a video of your object from all side or pictures
+
+Then you upload to get the 3D image 
+
+![Remote](../images/ImagW5/SCAN4.jpg)
+
+I decided to use a plate and try and avocado It was better but captured a lot of the back ground so I decided to
+crop it which was easy in the app
+
+![Avocado](../images/ImagW5/SCAN5.jpg)
+
+
+![Avocado2](../images/ImagW5/SCAN6.jpg)
+
+This was better but sill not did not separate from the ground
+
+I change my approach and use a ketchup bottle and working on the angles of the pictures I was taking 
+
+![Ketchup](../images/ImagW5/SCAN7.jpg)
+
+The angle and overlap of the pictures seem to help but we were still off. 
+
+I decided to try my little bulldog ceramic and did 2 full 360 with different angles and got a pretty good 
+output after I cropped it
+
+![Bulldog crop](../images/ImagW5/SCAN8.jpg)
+
+![Bulldog](../images/ImagW5/SCAN9.jpg)
+
+
+Here are the files for this week 
+
+[Bracelet Fusion](../files/3print/Bracelet.f3d)
 
+[Bracelet Prusa Slicer](../files/3print/bracelet.3mf)
 
+[Bulldog STL](../files/3print/BulldogSTL.zip)