Evaluation of Computer-controlled Cutting Week
VINYL CUTTING:
-
Great to remember o turn the machine on :D -
Close the picture showing the print interface, write down:When you chose 'get from machine', it will show the measured width of the vinyl roll by the vinyl cutter.
-
Mention, that you should either set the origin of the design in the software bottom left, or you can resize the document size to drawing or selection. -
You say: "the size of the vinyl should be set according to the length and width of the vinyl to be used"-
the length cannot be adjusted according to the length of the vinyl because you don't know what is the length of the vinyl when you use a roll of vinyl. I guess what you mean is to adjust the length in the print interface the same size as the length of your design plus considering a margin. -
Typo: The origin must be set to the left bottom corner or you can resize the dicument >> document
-
Typo: the size of the vinylworkspace should be set according to the length and width of the design shwon in the software >> shown
-
Typo: otherwise to things could happen >> three things?
-
the size of the vinylworkspace should be set according to the length and width of the design shwon in the software
- Remove length. You don't adjust the length, you only adjust the width according to the design width using the pinch rollers to be set aligned with the white grit marks.
-
Another solution for everything to work smoothly is: resizing the document size the same as the object size, opening the design in Roland Cutstudio using the inkscape extension named Roland Cutstudio.
-
-
Add a sentence about the process of removing unwanted parts of the vinyl after vinyl cutting. What tools did you use? Was weeding easily done? -
Sticky paper can be placed on top to remove it more easily. >> Change 'sticky paper' to 'Transfer sheet which is sticky'. -
Add a hero image of your vinyl cut project that shows you have transferred the vinyl to the final product.
LASER CUTTING
-
A detailed description about the set up process can be found here. >> here, in the group page.- Typo: A detailed description aout the set up process can be found in the group page. >> about
-
This week I will skip the first steps in creating a sketch in Fusion 360, as they were already explained in previous weeks.Add link to the previous week where it was explained.
-
Write down how you added user parameters. -
Write down the list of user parameters that you created and explain each of them. Where in your design they are used? How did you account for kerf in your design? From your design I can see that for the slotwidth you have typed 'm_w - kerf'. Even if you add a sceenshot from your parameters, this will not be visible. So you need to explain this clearly.-
For your information: A better way to do this is could be adding a new user parameter named slotWidth and give the value of m_w - kerf to it. This way, you will just assign slotWidth instead of typing the formula for each slot each time. -
I used to parameters for this sketch >> to? Do you mean three?
-
-
Add a screenshot of the created user parameters. -
I gave up and decided to build the face using dimensionsHow did you use dimensions? Write the tool name and the path that you accessed it.
-
And then I added some contact points to be able to connect the faces together.How did you do it? Write the tool name and the path that you accessed it.
-
Then I extruded the shape and gave it a texture.How did you do it? Write the tool name and the path that you accessed it.
-
Then I reflected this sideHow did you do it? Write the tool name and the path that you accessed it.
-
In the DRAWING section of Fusion, I created a pdf of the footprint.How did you do it? Write the tool name and the path that you accessed it.
FILES:
-
Vinyl cutter svg
-
It shows maximiliano? You explained vinylcut something else in your document. Remove this file and add svg file of the obejct that you vinyl cut and documented.
-
Remove the vinyl cut CST file. Only 1 svg file of the object that you explained in your document is needed.
-
Failed to be downloaded. Please upload again.
-
-
Vinyl cutterFailed to be downloaded. Please upload again.
Typo:
I first had to eliminate all the lines in the middle o the picture >> of the pictureA detailed description aout the set up process can be found here. >> abouThe new element about thisis that I can now use parameters >> this isFor more info about kerf and laser cutting of this task in general see Behnad Norouzi's introduction on Laser Cutting. >> Behnaz