Local Evaluation for 3D Printing and Scanning GROUP WORK
1. Custom made printer where, Arduino DUE controls motors, and Raspberry Pi conects to Octoprint.
- You can add the name of the printer: Leapfrog creatr HS
-
The first two models are Face Deposition Modeling printers
- Fused Deposition Modeling
- In your list above this sentence, the second and third ones use FDM 3D printing process. The first one is Formlabs Form3.3. Sindoh printer uses 3DVox software for printing.- It is better to say: We used 3DVOX software to slice the model and send the print order to Sindoh.4. Leapfrog printer Uses Ultimaker Cura for printing.- It is better to say: We used Ultimaker Cura software to slice the model and sent the print order via Octoprint web interface.5. Formlabs printer is- Complete this sentence >> We used PreForm software to slice the model and send the print order to Formlabs Form3.6. Overhang text- Write the result of this test for Sindoh.7. For Clearance (TBD) test for Formlabs you write 'thing'. What does it mean? You have the same thing word for Stringing test. -
Typo: problemsi in rising parts >> problems
9. Typo: ** Nozzle Diameter''
10. Typo: ** Build Volume **
11. ** Layer Height **
12. Provide link to Sindoh 3dwox dp200 >> https://3dprinter.sindoh.com/support/downloads/dp200
13. Provide link to Formlabs Form 3 >> https://formlabs.com/eu/3d-printers/form-3/
14. Provide link to LeapFrog Creatr HS >> https://www.treatstock.com/machines/item/31-leapfrog-creatr-hs
15. Provide link to Preform >> https://formlabs.com/eu/software/
16. Provide link to 3DWOXDesktop Printing >> https://3dprinter.sindoh.com/en/support/video-tutorials
17. Provide link to Ultimaker Cura >> https://ultimaker.com/software/ultimaker-cura
18. Provide link to OctoPrint >> https://octoprint.org/
20. Write a few sentences as your conclusion/reflection for testing these three 3D printers.