Embedded programming
Good job! Almost done. The group page requires some information about the used boards and how they are programmed. You can check from the previous year: https://fabacademy.org/2021/labs/oulu/students/motahareh-peyvasteh/week8.html. There are a few places where you seem to have small things to finish, but I went through the site anyway.
Some spelling corrections:
one set is no longer needed -> One set…
pin are sibjected -> pins are subjected
was stil functional -> was still functional
I wanted to the individual programming -> I wanted to finalize the individual programming
find the orde of the pins -> find the order of the pins
The code for the programmer -> the bootloader for the programmer
The Arduino programmer can be found-> The Arduino IDE can be found
I downloadeds Arduino programmer -> I downloaded Arduino IDE
jason code -> JSON code
the references, tools -> the preferences, tools
I programmed the device and the programming was successful. -> I programmed the UPDI programmer with SAMD11C_serial https://github.com/qbolsee/SAMD11C_serial/tree/main/SAMD11C_serial USB-to-serial code. It is needed for the full support for UPDI.
I looked for name megaTinyCore and google it. I found [https://github.com/SpenceKonde/megaTinyCore]( -> link broken and extra bracket
megatiny -> megaTinyCore
Othwewise -> Otherwise
In and Arduino system -> In Arduino system
pressed . -> pressed.
donwnloads -> uploads
I browsed thru -> I browsed through
32kHz -> 32 kHz
4KB -> 4 kB