add result of localsession in wax miling

docs/Instruction/tips/wax_milling_mods.md

@@ -108,6 +108,15 @@ Click calculate to make path and download .nc file
     ![](../images/wax_milling/mods_mill_raster_2.5D.png){width=300}
     ![](../images/wax_milling/mods_mill_raster_3D.png){width=300}
 
+!!! Note
+    From Assignment of finish cut in 2022
+
+    Spec of PROVerXL4030 |   value          |Value in finishcut    |Result
+    --            |---                     |---                      |--
+    cut speed(max)|	2000 mm/min = 33.3 mm/s|20 mm/s                  |OK
+    spindle speed | 12,000 RPM             |10,000 RPM               |OK
+    plunge speed  | 2000 mm/min = 33.3 mm/s|2.5 mm/s(Rolad' Defaults)|slow
+
 
 ## Milling
 - [gSender](https://github.com/Sienci-Labs/gsender)
@@ -132,3 +141,21 @@ Ref. Tip [Genmitsu PROVerXL 4030](./genmitsu_prover_xl_setup.md#g-gode-sender)
 
 ### Finish cut
 ![](../images/wax_milling/foam_finishcut_milled.jpg){width=400}
+
+
+!!! Attention
+    ###Endmill ###
+
+    - **Rough cut**
+        - 0.1250” DIA 4FL SE LONG AlTiN 1/8  
+        - Tool_dia: 1/8” =3.175mm  
+
+    - **Finish cut**
+        - 0.0625” DIA 2FL SE AlTiN 1/16  
+        - Tool_dia: 1/16” =1.5875mm  
+
+    ### Design to prevent of hitting by tilt
+      - 1/16
+
+    ![](../images/wax_milling/1_16_flatendmil.png){width=250}
+    ![](../images/wax_milling/1_16_flatendmil_tilt.png){width=400}

docs/Instruction/week09.md

@@ -186,10 +186,17 @@ none
    - machine: MDX-15_z=60.5mm - Wax_height_39mm = 21.5mm
        - 2 sides mold: 21.5mm each = 43mm_max
        - 1 side mold: 21.5mm_max
-  - prevention of hitting collet
-      - Ref. [last year](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/local_session/week11/)
-        - [tilt image](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/images/tilt_simple_image.png)
-        - [tilt degree calculation](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/images/tilt_degree_image.png)
+  - prevention of hitting by tilt
+      - 1/16_endmill
+
+![](./images/wax_milling/1_16_flatendmil.png){width=250}
+![](./images/wax_milling/1_16_flatendmil_tilt.png){width=400}
+
+
+- Ref. [last year](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/local_session/week11/)
+  - [tilt image](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/images/tilt_simple_image.png)
+  - [tilt degree calculation](http://academany.fabcloud.io/fabacademy/2021/labs/kannai/site/instruction/images/tilt_degree_image.png)
+
 
 ### Design for casting