docs/Makeademy_2023/Day_1.md

@@ -23,8 +23,8 @@ feed.
 
 ## The project
 
-The team's project is around building a device that ensures correct usage of 
-alcohol disinfectants in highly critical environments.
+Out team's project is around building a device that ensures the correct 
+usage of alcohol disinfectants in highly critical environments.
 
 Something like this, but smart and integrated with the building/environment 
 to ensure enforcement of required safety protocols.
@@ -61,12 +61,14 @@ Iteration 6 is purely for marketing purposes, and it involves creating a
 viral dance to promote the product. This is intentionally left as an 
 exercise for the reader.
 
-NOTE for the savvy readers out there: "sprints where value is delivered in thin 
-and vertical slices of functionality" is what we would have liked to do. In this 
-case, we're using the term *very* loosely, given the time constraints (less 
-than around ~18h total hours of work inside the maker spaces).
+---
 
-We're using terminology to loosely align a team of people who have just met 
+**NOTE** for the savvy readers out there: "sprints where value is delivered in 
+thin and vertical slices of functionality" is what we would have liked to do. 
+In this case, we're using the term *very* loosely, given the time 
+constraints (less than around ~20h total hours of work inside the maker spaces).
+
+We're using terminology to loosely align a team of people who have just met, 
 and we're not strict on the definitions :)
 
 But you and I will both know (secretly!) that this is not technically the 
@@ -74,7 +76,8 @@ best use of some of the terms 😉 Thanks for playing along without complaining!
 
 ![kanban_board.png](day1/kanban_board.png)
 
-A simple KanBan board allows us to track done/doing/ready to start tasks.
+A simple KanBan board on MIRO allows us to track done/doing/ready to start 
+tasks.
 
 ## Materials available
 
@@ -91,7 +94,7 @@ health. Amongst other:
 - Large Speakers
 - IP/USB cameras
 - Fans
-- Devices that could be disassembled for pieces:
+- Devices that could be disassembled for pieces or spare parts:
     - radios
     - electronic keyboards
     - music mixers

docs/Makeademy_2023/Day_2.md

@@ -11,7 +11,7 @@ EMP Recycling is part of [*Elemental Holding Group*](https://elemental.biz/),
 a global [urban mining](https://en.wikipedia.org/wiki/Urban_mining) and 
 recycling group.
 
-### Urban Mining
+### What is *Urban Mining*?
 
 Urban mining is the process of recovering rare metals (found in the discarded 
 Waste Electrical and Electronic Equipment) through mechanical and chemical 
@@ -67,7 +67,7 @@ Day 2 also involved some iterations on the electronics we designed the day
 before.
 
 Unfortunately, due to an accident with one of the jumpers, we ended up 
-connecting 12V from our external power supply into one of our laptops.
+connecting 12V from our external power supply **INTO** one of our laptops.
 
 The laptop died immediately and refused to turn on despite numerous attempts.
 

docs/Makeademy_2023/Day_3.md

@@ -17,8 +17,8 @@ The only things left are:
   is an eyesore. It is **so bad** that EMP Recycling is threatening to throw us 
   all into the bin if we don't fix it by the end of the day!! (alright.. not 
   really, but you get the idea...)
-    - We need some type of enclosure to contain all our components in a neat 
-    little package.
+    - The point is: We need some type of enclosure to contain all our 
+      components in a neat little package.
 
 So this is how we will spend most of the day.
 
@@ -29,7 +29,7 @@ So this is how we will spend most of the day.
 ## System Integration
 
 In terms of system integration, we would like to have a small-to-medium size 
-enclosure that can fit everything (excluding the power supply that we recycled 
+enclosure that can fit everything (excluding the power supply that we recycled, 
 due to its weight).
 
 Since our product will be used in hospitals and places that require hygiene 
@@ -81,6 +81,8 @@ A few design decisions that we incorporated:
 
 ![box_assembly.jpg](day3/box_assembly.jpg)
 
+![model-vs-case.jpg](day3/model-vs-case.jpg)
+
 ## Jump to day 4
 
 This is the end of Day 3!

docs/Makeademy_2023/Day_5.md

 # Day 5 - Pitching and Presentations
 
-![pitches_empty.jpg](day5/pitches_empty.jpg)
+![pi tches_empty.jpg](day5/pitches_empty.jpg)
 
 The stage is ready and the speakers for each team are pacing around empty 
-rooms practicing their last changes to their pitches.
+rooms practicing the last changes to their pitches.
 
 ## Pitches
 
-### Team 1
+### Team 1 - ReHero
 
-Team 1 presented ReHero - a Guitar Hero remix
+Team 1 presented ReHero - A Guitar Hero remix built from 
+recycled/reused materials
 
 ![pitches_2.jpg](day5/pitches_2.jpg)
 
@@ -17,9 +18,11 @@ Team 1 presented ReHero - a Guitar Hero remix
   <source src="../day5/rehero.mp4" type="video/mp4">
 </video>
 
-### Team 2
+![team1_pitch.jpg](day5/team1_pitch.jpg)
 
-Team 2 presented Joy Bike
+### Team 2 - JoyBike
+
+Team 2 presented Joy Bike - A customization set for bikes
 
 ![pitches_1.jpg](day5/pitches_1.jpg)
 
@@ -27,7 +30,7 @@ Team 2 presented Joy Bike
   <source src="../day5/joybike.mp4" type="video/mp4">
 </video>
 
-### Team 3
+### Team 3 - GermLock
 
 We presented GermLock - a hand sanitizer dispenser that integrated with 
 doors to unlock them only after use.
@@ -36,26 +39,33 @@ doors to unlock them only after use.
 
 ![presentation.jpg](day4/completed.jpg)
 
+![team3_pitch.jpg](day5/team3_pitch.jpg)
 
-### Team 4
+### Team 4 - REDUCE
 
 Team 4 presented a holographic art installation that encourages people to use 
-less electronics.
+less electronics. It incorporated 3D scans of the recycling plant we visited 
+on day 2 and all the lessons learned from them.
 
-![pitches_3.jpg](day5/pitches_3.jpg)
+![holographic.jpg](day5/holographic.jpg)
 
-### Team 5
+### Team 5 - LoveLamp
 
 Team 5 presented a set of lamps for long-distance relationships that help 
 people connect with each other even when far apart.
 
+![lamp.jpg](day5/lamp.jpg)
 
-## Conclusion
+## Feedback Sessions, Closing Ceremonies & Conclusion
 
 In the end, each team was able to present what they had created, and 
 received feedback and advice on how they performed.
 
-Our team won the award for Most Commercially Viable product.
+[//]: # (Our team won the award for Most Commercially Viable product.)
+
+<br/>
+<br/>
+<br/>
 
 # Day 6 - The day after
 
@@ -78,3 +88,5 @@ If you decide to apply and end up going, reach me via LinkedIn. I'd love
 to know how it went for you!
 
 Best of luck! 🤗✨ 
+
+![everyone.jpg](day5/everyone.jpg)
\ No newline at end of file

docs/Makeademy_2023/index.md

 # Home
 
+Welcome!
+
+After participating in [FabAcademy in 2022](../FabAcademy_2022), I decided to apply to 
+Makeademy 2023, and got selected 🥳
+
+This is a very short summary of how it went, what we built, and the lessons 
+learned. 
+
+If you accidentally landed here after google "Makeademy. Should I go?" I 
+hope this gives you a quick taste of what you might be doing (in a few weeks),
+if you decide to apply :)
+
 #### Overview and Prep Week
 
-[![schedule for prep week](img/wizzair_plane.jpg)](A_Preparation_Week.md)
+[<img alt="schedule for prep week" src="img/wizzair_plane.jpg" 
+width="1024px"/>](A_Preparation_Week.md)
 
 #### Day 1 - LinkMenu Fabrikas @ VilniusTech