@@ -71,6 +71,7 @@ This is the final result. I wanted to mention that my gear is not moving because
### Improving the Gear
In order to get the gear rotates, I must account for:
1. I am going to use the offset command in both gear holes to project these 2 circles -2mm, so the pins will have a tolerance, ensuring that I can slide the gears onto the pin after this is printed out.
2. On fusion, we have the following command: In **solid** go to insert---> insert Mcmaster-Carr component. Then, there are hundreds of gear options. I will use the plastics gears and gears racks. I am going to looking for the optimal which fits with my design that I have made it. Finally, I set to "step-file" and save the file, which will place it in my design.
