Evaluation of Your Assignment for the Computer-Controlled Cutting Week
Hi John,
You have done very interesting works for this week last year :)
From your documentation, I understood what you have done but the steps for how you did some things are missing. Therefore, please consider adding the followings to your documentation:
FOR VINYL CUTTING:
- You don't need to have own design for this task. But, it is good to add the link to the page where you found the design from.
- Explain the steps of operating the vinyl cutter.
- Upload .svg file for half_tetra
FOR PARAMETRIC DESIGN:
- You have explained how you defined the parameters, which is good and necessary. However, you have not actually explained how you sketched your construction kit in FreeCAD. So, you need to write the steps for designing the construction kit itself as well.
- Add a screenshot from your construction kit's sketch in FreeCAD.
- Mention clearly that you have materialthickness-kerf for the slotwidth. Because the image does not show it.
- Upload .stl file for construction_set
- Upload either .pdf or.svg file for construction_set
FOR LASER CUTTING:
- The steps for operating your laser cutter is missing.
- Briefly write about important safety considerations while working with a laser cutter.
FOR THE GROUP WORK:
It is good that you have the link to both 2021 and 2022 (Fab Lab Oulu) because although your 2021 group work looks really good, it does not include all the necessary tests; for example DPI and joint clearance and type. I also tag @ivanmilara here for this group work related matter to prevent any future issue with the global evaluator. To ensure your contribution to this year's group work (https://fabacademy.org/2022/labs/oulu/group_assignments/assignment_w04/), you can consider modifying the 2022 group work by adding some feedback, challenges or tips and tricks.
Bests,
Behnaz