Wildcard week
Hi,
Good job. Just some minor fixes:
Fix this sentence: The vacuum forming process works by heating a plastic sheet, forming it into a shaped vacuum forming tool using vacuum, cooling the plastic sheet until it sets hard & then removing the part from the tool.
maximum 8 cm height -> 4.5 cm.
Figures 3,4 and 5 are from the old version, which was done incorrectly. You could mention it early and add the correct images.
The mold material is film faced plywood. Not MDF.
while my design height was around 6 cm -> 4.5 cm.
wear gloves -> safety goggles. You didn't wear gloves for that machine.
bench saw -> band saw
vaccumm -> vacuum
et -> set
vaccumm -> vacuum
For some reason, your Reflection isn't automatically fixed to the screen size, but you need to scroll the screen to see all the text.
One thing we realized with Antti that OSB might not be dense enough to create good vacuum. Laser cut MDF board would be better.
Best regards Ari