Electronics production week

In the electronics production week we'll follow this: https://vimeo.com/499720322/3eb0274728 starting at about 13 minutes, also here: http://fabacademy.org/2020/labs/leon/students/adrian-torres/adrianino.html

Antti

We'll use these files to produce the circuit board. The board can be used as a USB-UART-interface or as a UPDI programmer.

We'll follows these to use it as a programmer. http://fabacademy.org/2020/labs/leon/students/adrian-torres/adrianino.html https://github.com/SpenceKonde/megaTinyCore/blob/master/Installation.md

You'll need e.g. PuTTY to communicate with the FTDI-USB-UART-circuit.

Any prerequisities to tomorrow's class other than watching the vimeo linked above and downloading PuTTY? Install/update/download something else etc.? Just to check, tomorrow we will meet online-only at 12:15? @anttim

Please install Arduino with the megatinycore -board-library, and PuTTY.

I have installed Arduino but I cannot find Megatinycore in the Board manager and library list:((

Follow instructions at: https://github.com/SpenceKonde/megaTinyCore/blob/master/Installation.md (Board Manager installation)

Try if you can open the Zoom-video: https://unioulu.sharepoint.com//r/sites/FabAcademy2/Shared%20Documents/Video%20Lectures/Electronics%20production/zoom_0.mp4?csf=1&web=1&e=EIKZxK

Yep, it is working