Wildcard week
Wildcard Week
From the assessment:
-
Documented how you made your creation -
Described problems and how you fixed them -
Included your design files and ‘hero shot’ of the result
Comments
- Good job!!
- Some comments about the processes you used:
- Summarize in the beginning, after the assignment text, what are you going to do and what processes are you using this week.
- Mention which software did you used for drawing.
- You say:
● Step4. Done, and set up it to be different color to make the outline clear.
Which color are you changing, the background? Can you explain why?
- For the inner part explain how you modified the settings in your software so the outline of the line is shown instead of the thick line
- Explain a little bit what did you do with Fusion 360 (2 or 3 sentences). Did you create a 3d model? Which Fusion 360 tools did you used.
- In the
Produce section
mention that you are going to sandblast the figure in acrlyic using for that a mask made out of vinyl. - In the
vinyl cutting
section present a picture of the mask. Also if you have, present a picture of the mask + the acrylic. - In the
sandblast mask
section mention the sandblaster machine model. You should find it from previous year assignments or in our website. - You say:
Also the angle, it is better to spray at a vertical angle
What do you mean with vertical angle? Do you mean perpendicular? This is wrong. The angle should be in an angle between 40 or 60 degrees. Otherwise, the material will bounce back and slows down the blasting process, and deteriorating the pistol. The ideal distance is around 15cm.
-
Do you have a picture of the acrylic with the mask after sanding? If so add it here.
-
Discuss a bit on problems you faced and how they were solved
-
What is the last line that reads:
Dita's Gown by Francis Bitonti Studio on Sketchfab
Edited by Ivan Sanchez Milara