Evaluation of Your Assignment for 3D Scanning and Printing Week
GROUP ASSIGNMENT
I will check your group assignment page when you guys tell it is ready.
-
Please provide reflection on your learning experience during the group work.Mainly, you learned about the design rules and limitations of some of the 3D printers. Please also specify it in the reflection section of your group work. For example, for the tested printers, you learned what is the minimum wall thickness to consider it in your design, or what is the minimum gap that you need to consider in your design when you want the parts move past or under each other, and etc.
3D DESIGNING
"Create a equilateral triangle base" --> Typo: an"Press L ( Select linked vertices) of any one of the tetrahedron to to select and" --> Typo: to toVery good explanation of design steps.
3D PRINTING
Please write down in the text what model settings do you choose for printing your object?"all the objects will be printed togather by layer" --> Typo: togetherPlease write down what was the size of your object and how long did it take to print it?"It is important to make sure the printed objects are fully immersed into the water." --> water? Please write 'Sodium Hydroxide (NaOH)' instead of water.It take several hours for the support material to be solved. --> takes"Do not forget the gloves for cleaning tank as well!" --> for putting your object in or removing from the cleaning tank.
3D SCANNING
Very good explanation as usual :)
cat.obj file does not download. Please upload again.
Edited by Behnaz Norouzi