Evaluation of Your Assignment for 3D Scanning and Printing Week
Hi Tatiana,
It has been a long time since you have had '3D Scanning and Printing Week'. Since you have not asked me yet to check your documentation, I created this issue as a gentle reminder.
Please write a message under this issue when your documentation is ready for the local evaluation.
BR, Behnaz
Additive Design
-
"Design for Additive Manufacturing implies that thing can not be created by subsctractive methods"Please rephrase this sentence, which is not correct. I understand what you mean but the sentence is puzzling; Since, additive manufacturing is not limited to things that cannot be created by subtractive methods! By using additive manufacturing, you still can make things that can be created also by subtractive manufacturing. In order to represent the capabilities of additive manufacturing, it is just the requirement of this assignment to design something that cannot be made subtractively.
Typo: "I went through the tutorial tutorial to create" >> double tutorialTypo: "to upload files here it is unexceptable" >> unacceptableExplain why ball bearing object cannot be made subtractively.Screen shots are good. But the steps of design (utilized tools, route to access those tools) are not thorough. You need to document the design steps from the beginning.When you are documenting your design elements, also write down what the size for each is.
3D Printing
Typo: "Besides, this printer does not require continius control" >> continiousImporting STL model in to GrabCAD Print >> route? How?-
Programm builds the support layers (orange) among the model naterial (green)Typo: program, materialRoute? How? What model settings for printing did you use? Again, you need to explain more in detail how you worked with GrabCAD including naming the tools that you used as well as the route that you accessed the tools.
You miss explaining the step between GrabCAD and Control center! (probably you imported the cmb file to the Control Center?)What about the control center? (size of your model, material, support material, required time for printing?)You need to explain more about how you worked with Stratasys Fortus 380mc. (safety instructions, putting the sheet into the chamber, your interaction with the display for choosing the job, locating your object on the sheet and starting the print).How did you remove your object from the sheet after printing was finished?Typo: "However ball joint got stucked as seams appeared at the same spot for the inner sphere and surrounded material." >> stuck
3D Scanning
I assume the cat scan is the one that you are gonna represent for passing this assignment, therefore:
You have different results. Explain which one is the main one for this assignment. The reader is suddenly surprised/confused with the cat scan for example without reading beforehand that you are now going to scan a cat!Add the picture of your model before scanning.Document clearly and in detail what you have done in different software (MakerBot Digitizer, fusion 360, etc.), what tools did you use and how. For example you are only saying "importing the scan in to Fusion 360"; you need to explain what was the purpose for importing the model into Fusion 360, and what you did there and etc.Format issue: "3D scanning result and importing the scan in to Blender. Decimating Mash of the object" >> the word 'object' has jumped down.Upload .f3d file for the bearing ball.Upload .stl file for the scanned cat again. (Or other scanned files if you wish) It does not open. Please check these things before announcing it complete for the next time since you do not have that much time left anymore.
Group Work
Link to the group work is missing.Add a few sentences about what you did and learned in your group work and how it was useful for your individual assignment.
New Comments
Typo: "Additive Manufacturing allows to create comples structures from CAD design of 3D scanning" >> complexTypo: "At first I created the sketch from 2 rectangles and 1 circle intersecting both rectange" >> rectangleTypo: "printer has a touch screen panel showing the status of the the machine," >> double theTypo: "The object can be resized, moved and viewd from different prospectives" >> viewed, perspectivesNone of Your files are downloadable. Please check my comments (5 and 6) above and upload again. Necessary files: for bearing ball >> .f3d and .stl; For your scanning project >> .stlTypo: "we learned that capabalities of the printers are differ" >> capabilities, different
Edited by Behnaz Norouzi