Evaluation Of Your Assignment for 3D Scanning and Printing Week
-
Summary of the week >> To be updated.- with complex structures depending the printer. >> Typo: depending on the
GROUP WORK
Link to the group work page is missing.Explain briefly in a few sentences what you learned during group work and how it was helpful for doing your individual assignment.Format >> Extra bullet point under the individual assignment.
3D DESIGN
Very good explanation of design steps :) However, you need to also add another step and explain how you put the small cube inside the bigger one.Also explain about your consideration in the size of the inside cube and the size of the holes on the sides of the bigger cube. This is how it doesn't come out from the bigger cube, right?Add the explanation of why your object cannot be made subtractively.Typo: Repeat this and prevous phase to each side of the cube where you have sketched four rectangles >> previous
3D PRINTING
You need to document how you worked with the 3D printing software (setting and considerations) and the 3D printer itself.- GrabCAD software will be used for that purpose. >> Link to the GrabCAD software opens your current page.
- Quite often there are a lot of designs waiting to printed, >> Typo: to be printed.
- Sheet needs to aligned with the pins >> Typo: to be aligned
- but if the desin is bigger >> if the object is bigger
- After one day, my design was removed from the sodium hydroxide and washed. >> Typo: my object was removed
- Final result seems to equal to original design >> Typo: seems to be equal
3D SCANNING
Good that this assignment helped you realize the potentials of 3D scanning to be integrated into the topic of your course :) You have lots of interesting scanning attempts.Typo: Unfortunately one of the Holotuber components didn't work properly and I didn't succeed wit that approach >> withTypo: I did test ARCore support in the practise >> practiceTypo: user interface was intuituitive enough >> intuitive
FILES
Please add .f3d and .stl files for your cube.Add .stl or .obj file for your 3D scanning project (the plastic cat).