Make something big: when to get access to machine?
Hi! When I would get access to "make something big" machine? I will finalize my design during weekend
regs, Jari
Activity
assigned to @Eikka
I
m on shift next tuesday so then if there is no rush in FabLab on that morning or if someone could come to FabLab because there need to be one staff member all the time. I would say the best option is tuesday morning 8.00 with me. Also Megumi and J-P could come to machine as a staff member but I dont know their ahifts or availability.I need to check your file before milling. If you make your design during weekend so there will be only limited time to check it before tuesday (or if there is something to correct). I`m not sure my schedule on monday but if you send file on monday I might only have time to check at monday late night so it will be impossible to make corrections and send it again to be checked before tuesday morning.
It seems that my design (2D contour) is giving errors. Can you (@Eikka ) recommend me how to fix it. Tuesday morning might be too much for cutting.
"Error: Failed to generate passes."
:-/
When I can cut my design or is Fab Academy now just failed/doomed?
I attached fl3d file ;)Computer_Controlled_Machining_Laru_Jari_errors.f3d
I did redesign my objects today:
- I did draw new sketch on top of my previous ones and then removed old bodies from the design history
- my ealier design was based on imported svg @Eikka said that it's not suitable approach..
So, now I have new (appropriately did sketch by myself) design and I am little bit still struggling with manufacture side.
When I try to add settings to 2D contour I cant' get -11 to bottom.. When I did look bodies from different directions I noticed that bottom layer is below the object.
You can see it from the images attached and exported autodesk file.
What I have done wrong? Anyway, sketching on top of existing object was pretty easy. So, I was able to copy my existing object by hand without issues.
Computer_Controlled_MachiningA_Bottom-top-molemmat_nolla...bottom_taso_alkaa_objektin_alta_.f3d@Eikka , I did reply to this thread where issue was open. I haven't got any reply here?
