Networking and Communications
Hi,
Here are the comments for the week: Have you? • Linked to the group assignment page • Documented your project. • Documented what you have learned from implementing networking and/or communication protocols. • Explained the programming process/es you used. • Outlined problems and how you fixed them. • Included design files (or linked to where they are located if you are using a board you have designed and fabricated earlier) and original code. Your work is not fulfilling the requirements (addressing and as Neil said in the lecture it is not enough to only send messages from your Arduino IDE serial to your board, because it has been made previously). You need to have some sort of addressing for each board, so that each one knows when they need to act. You also should use one board that you have made yourself (e.g. the LED-button board). If you are going to use networking in your final project, you can also link it here and cover individual part of the network and communication week with that. Check for example how Anssi made the assignment. Current text can be used for Output week. Group work missing. Check the assessment guide for the requirements.