Evaluation of Your Assignment for Computer-Controlled Cutting Week
Group Assignment
Please write down a few sentences of your own about things learned in your group experience that helped you in your individual assignment.
Vinyl cutting
-
Typo: I desided to vinylcut star figure. >> decidedThere is typo for 'decided' in other places of your document as well. Please fix all.
-
Typo: Cutting prosess >> Processhere is typo for 'process' in other places of your document as well. Please fix all.
-
Typo: a ficure have to be in vector graphics format >> figureThere is typo for 'figure' in other places of your document as well. Please fix all.
Typo: Is possible desing a ficure in other formats at begining >> design / figure / beginningTypo: when a ficure is redy >> figure / readyTypo: I just piced star figure from left side palet >> piced?Typo: I just piced star figure from left side palet >> replace 'palet' with 'tool bar'Typo: Some my student friends designed a ficure by using other design program such as Inscape >> figure / inkscapeTypo: First I choosed material from Stock of vinyls and placed it to cutter. I setted also cutting limits and checked it on cutter display. >> chose / set-
I setted also cutting limits and checked it on cutter display.You need to explain how you did that. Reminder: There are two pinch rollers and some white grit marks that you needed to align. Please explain how.
-
Then checked cut settings such as size of sheet and position on cutterBefore this sentence please explain: that you chose 'edge' from the display and explain what happens after you choose 'edge'? What do sensors do and what will be shown on the display?
Then, you need to explain how you sent the cut order from cut studio to the vinyl cutter. Also mention the name of the tools that you used in Cut Studio.Typo: I started cutting and cutting was runnig smoothly >> running-
I started to peel that piece then suddenly star was born.Good that the star was born successfully :) But, you need to explain how you did the peeling? Mention the name of the tool that you used for peeling. Also, if you used transfer sheet, write about it.
Parametric Design
Typo: discussed with my student frieds in Fab Lab >> friendsTypo: In the picture for initial design of part, there is a typo. Replace outsite with outside.Typo: You can see that cutting data is calculated base on initial >> based on-
You can see that cutting data is calculated base on initial values such as material thickness, kerf, part widht and radial of corner.In step 1, after this sentence, explain the parameters that you defined in the text by writing down the name of your parameters and the values/formulas for them. We need to see your explanation and a defined parameter which is dependent on kerf and material thickness.
Typo: When cutting data was redy I started design part coarse geometry. >> readyIn step 2, you should explain more in detail how you designed your object. Name of the tools that you used and how you accessed the tool.In step 3, name the tools that you used and also how you accessed those tool (write down the route). For example (this is just an example): "I used circle tool from object >> circle to draw a circle."Step 4, again, name the tools that you used.
Laser Cutting
Typo: I choosed Print >> choseTypo: I choosed right material file 3mm_MDF_Cut and loaded it. >> choseTypo: Then I sended cutting data to laser cutter to press print putton. >> sent / buttonTypo: First I choosed my Job (cutting data) >> choseYou also adjusted 'focus'. Please write how?Typo: I check that ventilation was on and after that I stared cutting by push button Go. >> checked / startedTypo: I assemblied teepot stand by using 21 parts. >> assembledTee pot stand looks very nice :)Write down briefly about important safety instructions while working with laser cutter.Typo: It first of alla It was nice to see how powefull parametric design is. >> First of all, it wasTypo: I was very happy form my laser cutting project. >> I was happy with my laser cutting project
Files are missing
Please upload the following files:
.FCStd file for the tee pot.STL file for the tee pot.SVG file for the star >> Remove .CST file and upload .svg file instead
New Comments
Typo: "I started cutting to chose cutting tool from ribbon. " >> chooseI started to peel that piece by using silhouette hook >> I think by "silhouette hook" you mean tweezers?Typo: "I pressing Create new rectangle in the sketch (R)." >> I pressing?Typo: "Then I cutted part lines by using Trim an edge with respect to the picked position (T, R)" >> cutTypo: "Then I defined similarly horisontal and vertical distances" >> horizontal
Edited by Behnaz Norouzi