od update

docs/Output Devices.md

@@ -46,8 +46,9 @@ sketch.![](./images/output/IDE.jpg)
 I uploaded the sketch without any errors, but still the motor did not run. I checked all connections and finally had to change my 9
 battery.
 
-<iframe width="688" height="387" src="https://www.youtube.com/embed/jXlCYYzOJkE" frameborder="0" allow="accelerometer; autoplay; e
-  crypted-media; gyroscope; picture-in-picture" allowfullscreen=""></iframe>  
+<iframe
+  src="http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/students/mitalee-parikh/od-1.mp4">
+</iframe>  
 
 Next, I fabricated a circular base to make the top spin on top from some tape and board I had at home. The pink top was milled by me on a Roland 4-axis milling machine some years back. If in the lab, I would like to make this setup more refined using the machines.
 
@@ -55,8 +56,9 @@ Next, I fabricated a circular base to make the top spin on top from some tape an
 
 Finally I put everything together and this is the setup for a forever spinning top.
 
-<iframe width="688" height="387" src="https://www.youtube.com/embed/bE3cYQz22Pw" frameborder="0" allow="accelerometer; autoplay;
-encrypted-media; gyroscope; picture-in-picture" allowfullscreen=""></iframe>  
+<iframe
+  src="http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/students/mitalee-parikh/od-2.mp4">
+</iframe>   
 
 #### Code
 
@@ -103,8 +105,9 @@ This is the whole setup.
 
 This is a video of it in action
 
-<iframe width="688" height="387" src="https://www.youtube.com/embed/FJzphqxnXO8" frameborder="0" allow="accelerometer; autoplay;
-    encrypted-media; gyroscope; picture-in-picture" allowfullscreen=""></iframe>  
+<iframe
+  src="http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/students/mitalee-parikh/od-3.mp4">
+</iframe>  
 
 I would like to make the base more refined and add the breadboard and arduino inside, and connect to a battery instead of powering it from the arduino. To make the top spinner.