minor update embedded week

docs/blogs/mar13.html

@@ -178,7 +178,7 @@
 				ATTiny85 to it. You need to do this, otherwise it won't work. The architecture inside might be different or the amount of pins. Some important pins to know are the VCC, GND and RESET.</p>
 				
 				<li>Define the pins</li>
-				<p>As you know each micro controller has a certain amount of pins. The ATTiny44 has 14 pins, the ATTiny45 has 6 and the ATTiny85 has 8. One of the things that I didn't take into account
+				<p>As you know each micro controller has a certain amount of pins. The ATTiny44 has 14 pins, the ATTiny45 has 8 and the ATTiny85 has 8. One of the things that I didn't take into account
 				until much later was that each pin has a meaning (do read a data sheet, or at least google your micro controller!). So I first just randomly wired everything in Eagle, made the PCB and...
 				well, blew up the micro controller. So, you need to define the pins so that the loader and the micro controller will do the right things. You can for example say that pin 1 is a LED, but pin 2
 				needs to be a push button. </p>

docs/blogs/mar13.html~

@@ -315,7 +315,7 @@
             -->
              <h2 id="Title9" class="section-heading">Reflection on this week</h2>    
             <p>
-            This week I really learned about project planning and more especialy priorities. I left the board for what it was and focused on the code and my other work that I have to do. Most things on which I
+            This week I really learned about project planning and more especially priorities. I left the board for what it was and focused on the code and my other work that I have to do. Most things on which I
             was stuck, are, or not my fault (the ISP breaking) but just a lack of time. I'd need a full day or 2 to finish up all the assignments, fix the rough edges of my documentation and be up to date
             again. 
             </p>