...

w5.html

@@ -133,7 +133,8 @@
           Import the design by pressing the CUT button on the panel, and finally the machine is really ready to mill the design on the circuit board.
         </p>
         <img src="image/assignment/w5/010.jpg" width="1100" alt=""><br><br>
-        <p>The PCB wasn't neat, but after brushing the surface it looked pretty fine for me. </p>
+        <p>The PCB wasn't neat, but after brushing the surface it looked pretty fine for me.
+        I also used a cutter to remove unnecessary parts.</p>