electronics production (week 5)
Hello, all in all, good documentation. Here are some notes you need to fix.
Traces and outline links are in wrong order (traces points to outline and vise verse) On both occasions.
"The Intended to use the milling bits of 0.4mm, " this sentence is missing something, but I dont know what. Please re-write it or clarify a bit.
In setting origin: Please explain how you set the z-azis origin. It is a bit more efford than x and y -axis.
" bit it is possible to mill the pcb for small lengths than using the 0.5mm" in here use "smaller detail" or something else instead of "small lengths" as it makes no sense.
"As I already started with my Individual Task during my explaination of , and already did the PCB Milling" please re-write this sentence. It makes no sense.
On programming part. Please provide screen shots of make flash, make fuses and make rstdisbl. Also make fuses will not make the chip unprogrammable, but the rstdisbl does. So you are missing one step of the process. And please note that you removed the solder jumper as well.
-Jari