Feedback_3D Scanning and Printing_Week 6
-
Group Work
-
Tested the design rules for your 3D printer(s) -
Documented the design rules for your 3D printer(s) -
Included your design files and ‘hero shot’ photo(s) of the final object(s) -
3D Printing
-
Shown and documented how you designed your object -
Explained why it could not be made subtractively -
Shown and documented how you made your object using 3D printer -
Included your design files and ‘hero shot’ photo(s) of the final object -
3D Scanning
-
Scanned an object -
Documented how you scanned the object -
Included your file(s) and ‘hero shot’ photo(s) -
Reflection
-
Described what you learned by testing the 3D printers (Identified the advantages and limitations of 3D printing) -
Outlined problems that you faced in 3D scanning and how you fixed them (Identified the advantages and limitations of 3D scanning)
Please consider the following modifications for your group work:
1- Technology for Fortus --> FDM not FFF (trademark issue)
2- Software : InsightTM --> link does not work
3- susceptible to wraping --> warping
4- Wear the gloves and place the Foundation sheet inside the chamber where the 3D Design will printer --> will be printed.
5- Select you task --> your
6- Leapfrog & Sindoh technology --> FFF not FDM (trademark issue)
7- to compare these three printers inorder to --> in order
8- Delete the zip file for 3D tests. It is too big and it is not necessary. The link that you have provided is enough.
Please consider the following modifications for your 3D printing:
1- figs 23 & 24 do not show.
2- can perform the functionality of movablity --> movability?
3- Please explain why your 3D object can not be made subtractively.
4- Add .f3d file of your hinge box.
Please consider the following modifications for your 3D scanning:
1- Unfortunetely, I was not able to scan the Objhects as I was facing some errors when saving the 3D scanned objects -->
unfortunatelyobjectsYou were able to scan the objects but you were not able to save the result.
2- After cropping, I exporting the 3D model into .obj --> exported
3- This week was a very long week but interms of learning --> in terms
4- characterization and there limitations --> their