Feedback_Computer-Controlled Cutting_Week 4
- Group Work
-
characterized your lasercutter's focus, power, speed, rate, kerf, and joint clearance - Parametric press-fit construction kit
-
Explained how you parametrically designed your files, accounting for the lasercutter kerf. -
Shown how you made your press-fit kit. -
Included your design files and photos of your finished project - Vinyl Cutting
-
Cut something on the vinylcutter. -
Explained how you drew your files for vinylcutting. -
Shown how you made your vinyl project. -
Included your design files and photos of your finished project.
Please clarify the followings for press-fit kit:
-
the aluminium is removed and the focus is set by pressing down the joystick. -
You don't need to press down the joystick for focus setting. -
You need to also document how you used Laser cutter(s). (safety, job, jog, origin setting, focus adjustment and etc.) -
In your design, after the 'DRAWING VIEWS>Base Drawing' stage, did you export as PDF? If yes, please mention it.
Design Files:
-
Please Consider a section at the end of your documentation for including your files (parametric design (.stl, .pdf),design for vinyl cutting (.svg), design for kerf test (.svg, .pdf), design for power, speed and frequency (.svg, .pdf).
Please clarify the followings for vinylcutting:
The size the of the piece is measured and displayed on the screen.-
After pressing the 'enter' button, the size the of the piece is measured and displayed on the screen.-Here: "Increase the length’s dimension by 10 to 20 mm so that the cutter leaves a gap between the edge and the design. Then print." also write down that you kept the width that was received from the machine. Explain how you weeded the cut vinyl.positioned the rollersMention that pinch rollers should be aligned on grit marks. Also mention that you raised the loading lever after loading material.If you used transform sheet, mention it.Add the picture of your sticker (final product). The current picture is a bit confusing (I can see only the unwanted part at this picture).
Typos:
The select MODEL>DRAWING>Drawing from design to prepare the file for printing.then
Edited by Behnaz Norouzi