Applications and implications
Few comments:
- You say:
motors that indicate when movement is detected
How do they indicate this?. Develop further
-
In the question what will you design? You need to specify clearly which boards are you designing and fabricate and what parts are you going to 2D and 3D design.
-
In the question: What materials and components will be used: -> You say 3D printing material. Which one PLA or ABS?. Which system would you fabricate with plywood and which one with 3D printer.
-
In the section how much will it cost, just go to the fabinventory and http://fab.cba.mit.edu/about/fab/inv.html write the price. The FTDI headers are the S1013E-36-ND in digikey. After that you may have an estimation of the price. For the price of plywood/acrylic/PLA check last year projects
-
In the section what parts ans systems will be made? Be a little bit more specific what you mean with design of the actual movebot and the storage for the electronic components.
-
In the section what processes will be used? , specify for which of the previous parts you are using each process. For instance, where are you going to use network and communications.
-
In question What questions need to be answered? be a little bit more specific on the possible challenges.
-
In the evaluation question be a little bit more specific on the stated objectives. Mention which are the minimum set of features that your project should have. In addition, try to answer if you expect having a early prototype for research or almost final product for real use. What would you consider a successful project?
Have you?
Answered the following questions?
-
what will it do? -
who has done what beforehand? -
What will you design? -
what materials and components will be used? -
where will they come from? -
how much will it cost? -
what parts and systems will be made? -
what processes will be used? -
what questions need to be answered? -
how will it be evaluated?