Feedback_3D Scanning and Printing_Week 6
-
Group Work
-
Tested the design rules for your 3D printer(s) -
Documented the design rules for your 3D printer(s) -
Included your design files and ‘hero shot’ photo(s) of the final object(s) -
3D Printing
-
Shown and documented how you designed your object -
Explained why it could not be made subtractively -
Shown and documented how you made your object using 3D printer -
Included your design files and ‘hero shot’ photo(s) of the final object -
3D Scanning
-
Scanned an object -
Documented how you scanned the object -
Included your file(s) and ‘hero shot’ photo(s) -
Reflection
-
Described what you learned by testing the 3D printers (Identified the advantages and limitations of 3D printing) -
Outlined problems that you faced in 3D scanning and how you fixed them (Identified the advantages and limitations of 3D scanning)
Please clarify the followings for the group work:
Link to the test model need to be included.For Leapfrog Creatr HS:WÍn our FabLab: we use PLA (material) and PVA (support material); PVA is water soluble support material; slic3r (software)
Please clarify the followings for 3D Printing:
The set up (in Insight) used to build the object should be mentioned.After placing your design inside of the chamber of secrets, you need to mention how you worked with the 3D printer (Stratasys).one .STL file and one .f3d file for your design is enough to be included. .f3d file is not there.
Please clarify the followings for 3D Scanning:
Another attempt for 3D scanning is needed: 1)to gain more experience and provide a reflection on the challenges that you faced and the solutions that you adopt to have a better result; 2)to document how you scanned the object; and 3)to include your 3D scanned file
Typos:
Below as a teaser I'm presenting the most pr de,pr deStill lines are are bendingwe suppose to show some skills in additive manufacturingwe are supposed toMost likely I would need to swich in the future.switchlaithe or pretty anythinglathethere are no access to use laithelathebring it to FabLabbringingPlacing my design inside of te chamber of secretsthe