Feedback_Computer-Controlled Cutting_Week 4
- Group Work
-
characterized your lasercutter's focus, power, speed, rate, kerf, and joint clearance - Parametric press-fit construction kit
-
Explained how you parametrically designed your files, accounting for the lasercutter kerf. -
Shown how you made your press-fit kit. -
Included your design files and photos of your finished project - Vinyl Cutting
-
Cut something on the vinylcutter. -
Explained how you drew your files for vinylcutting. -
Shown how you made your vinyl project. -
Included your design files and photos of your finished project.
Very good documentation :-)
Your group work miss documentation on testing power, speed, etc..STL file is missing.
Please clarify the following for your group work:
- 0.095 mm for MDF
- MDF 3mm
- You need to mention the values of your test parameters as well. (what was the height and width of your design?)
- Upload the files that you used for your group work.
Please clarify the following for your Vinylcutting:
- What was the value of the line width?
- Adjust blade depth (value 1 to 4)
- Which value did you use?
- Measure the size of the substrate using vinylcutter, remember about two modes: edge and total length
- Mention that it will done after pressing 'ENTER' button.
- After some shearing, tools artistically spread
- name the tools that you used for weeding.
Please clarify the following for your press-fit kit:
- I decided to download Draftsize 2018
- Link to the download page
- You need to list and explain your defined parameters.
It is good to have a reflection section at the end of your document and wrap up your reflection on your experiences.
Typos:
- to park you huge car in the old town of Krakow :)
- your
- Pertti
- Perttu :D
- After I cutted out my Witcher medalion
- cut
- I succesfull passed activation part
- succesfully