We have also delays directly related with the board schema design. We started by this one EAGLE board but adapted it to two steppers. After same work we decided to redo all of it from the scratch. Since its a complexe board for me I follow the Luis Carvão work.
All the EAGLE and FLATCAM GCODE files can be found at fabcloud [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign) and at my personnal google drive [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY).
I zipped all the files and they can be found [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign.zip). All the EAGLE and FLATCAM GCODE files can be also found at fabcloud (if you ahve permissions) [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign) and at my personnal google drive [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY).
!!! todo list
- [X] Gerbalino board with two motors
...
...
@@ -47,7 +47,7 @@ After same **research** we found this project very challenging, a scanner: you c
Each member will **document** the project on there sites:
- LC (lider) - Project site [here](http://fabacademy.org/2019/labs/fct/M&M%20Design/) and this is the plan agreeded:
Mónica Pedro did the software work and documented at her page [here](http://fabacademy.org/2019/labs/fct/students/monicapaula-costapedro/02/mechanical.htm)) as well as [André Rocha](http://fabacademy.org/2019/labs/fct/students/andre-rocha/w15.html) documented his work and was responsable for the CAD machine design.
All the EAGLE and program files for controlling the machine and comunicating between RASPpi and Atmega 328p can be found [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign) and at my personnal google drive [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY).
I zipped all the files and they can be found [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign.zip). All the EAGLE and program files for controlling the machine and comunicating between RASPpi and Atmega 328p can be found (if you have permissions) [here](/Users/antoniocarlosgoncalves/fabacademy2019/antonio-gomes/docs/assignments/FilesFolder/week_15_17_MachineDesign) and at my personnal google drive [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY).
