We did change the planning according to the team members schedule. So, we start with the electronics and ended up with the assembly.
By the end of this week schedule we didn't have the electronics ready nor the complete software prepared. Everything was retarded by the milling and the soldering issues. We lost a lot of time debugging until we decided to restart a new board. This was the first time I soldered a atmega328. Its really important to use 0.3 mm flat bits.
We have also delays directly related with the board schema design. We started by this one EAGLE board but adapted it to two steppers. After same work we decided to redo all of it from the scratch. Since its a complexe board for me I follow the Luis Carvão work.
All the EAGLE files can be found [here](https://gitlab.fabcloud.org/academany/fabacademy/2019/labs/fct/students/antonio-gomes/tree/master/docs/assignments/FilesFolder/week%2011%20input%20devices) and [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY).
All the EAGLE files can be found [here](https://gitlab.fabcloud.org/academany/fabacademy/2019/labs/fct/students/antonio-gomes/tree/master/docs/assignments/FilesFolder/week_15_17_MachineDesign) and [here](https://drive.google.com/open?id=1Z9piwM9xCbg6XFwhQNHIXudWf7W6QhBY). The CAD files are [here](https://myhub.autodesk360.com/ue2af847b/g/projects/20190426190501481/data/dXJuOmFkc2sud2lwcHJvZDpmcy5mb2xkZXI6Y28uSDlaWkRsdHZUWVNYRS1waEd4ZzA3Zw/dXJuOmFkc2sud2lwcHJvZDpkbS5saW5lYWdlOnZNeGRzVU92UVFxeHV3emZFbXI2Wmc?version=1&show=viewer&viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1C1cAWAZkYE4ARoxgBaAEwRxY3jHGiBAE0aiAHIwBmuAOwbG2xTC4A2NAF8QAXSA)
