@@ -150,6 +150,9 @@ I will test the use, instead of EPS, as in the starboard hull, I will use **cork
The **clean** files can be found [here](https://gitlab.fabcloud.org/academany/fabacademy/2019/labs/fct/students/antonio-gomes/blob/master/docs/images/Project/PortBoardHull_V7_clean.zip).
!!! warning
To use this files with easel from Fusion 360 slicer Filipe help with the Autodesk command **overkill** and **join** in order to kill all the sobrepositions and join the points in the same line in only one line.
## Electronics
The main board include the ATmega328p processor, the BLE RN4871, terminals with 8 V, 5 V and 3.3 V, for the servo, the processor and the BLE. It comunicates thougth serial by I2C and FTDI. It as four extra terminals, 6 terminals for the air and water temperature, 2 terminals for the water sensor, and 6 pins for UVA (VEML6070 sensor) and visible light sensor (phototransistor): SCL, SDK, ACK, power and light sensor pinout
