corrections

docs/group_assignments/group2/assignment5.md

@@ -64,24 +64,24 @@ We used this [test model](https://www.thingiverse.com/thing:1363023) to compare
 |TABLE 3:Printers' Settings for TEST2|||||
 |-|-|-|-|-|
 ||Ender-3 pro|Raise 3D pro2|Formlabs form2|Fortus 380 mc|
-|Layer height|0.2 mm|0.2 mm|1.6 mm|0.254 0mm
-|Material|PLA|ABS (hips support)|Resin|ABS
-|Bed Temp|60|100|-|92
-|Material Extruder Temp|200|240|-|230
-|PrintTime|2h 55min|1h 56 min|1h 30 min|1h 27 min
+|Layer height|||| 
+|Material||||
+|Bed Temp||||
+|Material Extruder Temp||||
+|PrintTime||||
 
 ### Table 4
 
 |TABLE 4: Printers' Settings for TEST3|||||
 |-|-|-|-|-|
 ||Ender-3 pro|Raise 3D pro2|Formlabs form2|Fortus 380 mc|
-|Layer height||||
-|Material||||
+|Layer height|0.2 mm|0.2 mm|1.6 mm|0.254 0mm
+|Material|PLA|ABS (hips support)|Resin|ABS
 |Support||||
-|Bed Temp||||
-|Material Extruder Temp||||
+|Bed Temp|60|100|-|92
+|Material Extruder Temp|200|240|-|230
 |Support Extruder Temp||||
-|PrintTime||||
+|PrintTime|2h 55min|1h 56 min|1h 30 min|1h 27 min
 
 ### Table 5