Newer
Older
<iframe width="560" height="315" src="https://www.youtube.com/embed/vKj-X4PUmIw" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
An alginate based, heat-resistant and waterproof semi-transparent, matte foil
Color without additives: semi-transparent, white when layered
Need attention: daily, to check if sheet needs to be taped down to stay in place on the mold
* **Sodium alginate powder - 12 gr**
* the polymeer (so it becomes a solid)
* **Glycerine - 20 gr**
* the plasticizer that bonds with the alginate (makes it flexible).
* **Water - 400 ml/gr**
* to dissolve and mix the polymeer and plasticizer
* optional: use a (diluted) natural dye instead for a colored plastic
* **Sunflower oil - 10 gr**
* filler to reduce shrinkage
* **Calcium chloride solution 10% (10 gr to 100 gr water)**
* is the curing agent: calcium chloride attracts moisture very strongly: spraying it onto the alginate plastic starts the curing process.
1. **Blender**
2. **Glass jar with lid**
3. **Spray bottle** (150 ml contents, for the calcium chloride solution)
2. **Acrylic sheet** smooth surface to cast the foil onto. A smooth surface will create a smooth matte foil.
3. **A strip of acrylic or squeeguee** to push the alginate mixture into place and form an even and flat rectangle
3. **Painting tape** to tape down if edges of the sheet start to come off of the surface
4. **Kitchen paper** to soak up the water that will be released from the alginate mixture
Approx. 200 ml of alginate plastic that can be stored for two weeks and used for any alginate application
Approx. 100 ml of calcium chloride 10% solution that can be used for any alginate recipe
- Weigh your ingredients for the alginate plastic (alginate, glycerine, water) in a blender
- Optional: use a diluted natural dye instead of water in the same amount for a colored plastic.
- Leave the mixture overnight to allow the bubbles to come to the surface and pop.
- Pour the alginate onto the acrylic sheet and use the squeeguee or acrylic strip to mold the liquid into a rectangular shape of about 3mm high
- Spray the sheet with the calcium chloride solution (use quite a lot)
- Let it sit for a few minutes, then spray again if you see the liquid is starting to ooze out from the sides. The film that is created in the curing process can break from the weight of the liquid bubble. By respraying you can close these until the sheet is cured enough and stable to dry further.
- The alginate can release quite a lot of water at this stage, so it's wise to place some kitchen paper around it to absorb excess water.
Keep an eye on the sheet every few hours, especially on the first day. The thinner edges of the sheet might curl up when drying and pull of parts of the sheet. When it comes off it will start to warp. Taping it down onto the acrylic helps to keep it in place an dry in shape.
Let it dry up to seven days to get to the final form. When it no longer feels cool to the touch it is dry enough to take off. If you want to trim the edges do it while the foil is still a bit softer for a clean cut.
trim the edges with scissors or a scalper and ruler if you wish
*alginate casted onto acrylic sheet, first few minutes of curing, Loes Bogers, 2020*
- Replace the water with a (diluted) **natural colorant** such as a vegetable dye or water-based ink (e.g. hibiscus, beetroot, madder)
- Add **less glycerine** for a less flexible foil
- Take out the sunflower oil and use 30% less alginate to cast thinner foils
- You can also use this recipe to make composites such as the one described in the [alginate net recipe](https://class.textile-academy.org/2020/loes.bogers/files/recipes/alginatenet/)
Alginate plastic is used a lot in molecular gastronomy, for (reverse) spherification that was patented by William J. S. Peschardt in the 1940s and popularized by the Adrian Ferra of the infamous restaurant El Bulli. Alginate plastics is also used a lot in molding and casting of dental technology industry.
**Needs further research?** Not sure
### References this recipe draws from
The alginate recipe is a modified version of: **Flexible Bio-plastic Alginate Recipe** by Cecilia Raspanti (Textile Lab, Waag), Fabricademy Class "Biofabricating", 2019, [link](https://class.textile-academy.org/classes/week05A/).
- Made of by-products or waste: no
- Biocompostable final product: yes
Recycling this bioplastic with PET plastics contaminates the waste stream. Compost bioplastics in a warm environment with sufficient airflow.
The foil has a feel that can be compared with a window foil (to blind windows but let the light through): it's matte but very translucent.
- **Strength**: medium
- **Hardness**: flexible
- **Transparency**: translucent
- **Structure**: closed
- **Texture**: medium
- **Temperature**: medium
- **Acoustic properties:** needs further research
- **Anti-bacterial:** needs further research
- **Heat resistance:** high, up to 150 degrees celcius
- **Water resistance:** waterproof (for PH neutral and acidic water, not for alkaline water)
- **Surface friction:** medium
- **Color modifiers:** none
## About this entry
### Maker(s) of this sample
- Name: Loes Bogers
- Affiliation: Fabricademy student at Waag Textile Lab Amsterdam
- Location: Amsterdam, the Netherlands
- Date: 25-02-2020 – 02-03-2020
### Environmental conditions
- Outside temp: 5-11 degrees Celcius
- Room temp: 18 – 22 degrees Celcius
- PH tap water: 7-8
### Recipe validation
Has recipe been validated? Yes
By Cecilia Raspanti, Textile Lab, Waag Amsterdam, 9 March 2020
### Estimated cost (consumables) in local currency
1,12 Euros for a yield for a sheet of alginate plastic (about a 50 cm x 12 cm sheet, 2 mm thick)
Sodium Alginate powder - Unique Products Schuurman (online retailers, wholesale food stores like Sligro)
Calcium chloride - online retailers
Acrylic sheets - hardware stores and online retailers
## Copyright information
### This recipe is in the public domain (CC0)
Yes
### This recipe was previously published by someone else
This is a modified version of: **Flexible Bio-plastic Alginate Recipe** by Cecilia Raspanti (Textile Lab, Waag), Fabricademy Class "Biofabricating", 2019, [link](https://class.textile-academy.org/classes/week05A/).
- **Flexible Bio-plastic Alginate Recipe** by Cecilia Raspanti (Textile Lab, Waag), Fabricademy Class "Biofabricating", 2019, [link](https://class.textile-academy.org/classes/week05A/).
- **The Science Of Spherification: Theoreticians examine the atomic details of an avant-garde culinary technique"**, by Bethany Halford, Chemical and Engineering News, Volume 92 Issue 42, pp. 35-36, October 2014: https://cen.acs.org/articles/92/i42/Science-Spherification.html
*Alginate foil, Loes Bogers, 2020*
*Alginate foil, Loes Bogers, 2020*
*Alginate foil, Loes Bogers, 2020*
*Alginate foil, Loes Bogers, 2020*
*Alginate foil, Loes Bogers, 2020*
*Alginate foil, Loes Bogers, 2020*