diff --git a/docs/assignments/week11.md b/docs/assignments/week11.md
index 27ea9ec2df6e1f17861d2f8fe83f751a88b99c93..9d826d7079c9ff2f9062fbe09655a8dd468e7a42 100644
--- a/docs/assignments/week11.md
+++ b/docs/assignments/week11.md
@@ -51,6 +51,30 @@ The project explores the possibilities to create relief surfaces and three-dimen
 
 ### **3D MILLING WITH SHOPBOT**
 
+**STEP-BY-STEP**:
+   
+
+
+  1. Open KeyPad by hitting the K letter on your keyboard. You can control the position of the x and y axis by the arrow keys. (Left and right arrows for changing the x-axis.Up and down arrows for changing the y-axis.)
+
+  2.  Homing x and y axis by pressing Zero (2) axes (X&Y). 
+  
+  3. You can change the position of the z axis by the page up and page down keys. 
+  
+  4. To zero your z-axis, bring the metal plate underneath your miling bit.
+  
+  5. Touch the metal plate to the miling bit to check if inp 1 flashes green to make sure the miling bit will stop when it touches the plate.
+
+  6. Lower the z axis a little bit and make sure the plate is exactly underneath the miling bit.
+ 
+  7. Hit the Zero Z button for zeroing the z-axis.
+
+  8. Bring your x and y axis to desired job origin. Take note of the positions of your home x and y axis because it helps you to go back to job origin.
+
+  9. Zeroing the x and y axes by selecting Zero (2) axes (X&Y).The X and Y axis in the position pane is now 0,000. This is where your job will begin.
+  
+
+Take note of the positions of your home x and y axis because it helps you to go back to job origin.
 
 ## **MAKING A COMPOSITE**