diff --git a/docs/assignments/week09.md b/docs/assignments/week09.md index 17992894a33c3edb9d7cdd08adf7b585d59e9eb2..6d24707f0298987dea4cd10fb1f41ef4ebd28f68 100644 --- a/docs/assignments/week09.md +++ b/docs/assignments/week09.md @@ -80,12 +80,13 @@ Prepare this recipe [^1] by collecting the ingredients necessary, to be found in After its preparation I immediately brushed the bioresin on the reinforcing material because it starts to gelatinize quite quickly. In the case of the felt weaving, I brushed it front and back, overlapping two layers in the box. In the case of the particles, I soaked them directly in the bioplastic solution, mixing well and then filling the wooden box with them. In the latter case I applied pressure with clamps during the two days of drying. In the case of the felt weaving I tried a vacuum but the bag didn't work :( I suppose the bag wasn't perfectly closed. -## EPOXY RESIN PREPARATION +## EPOXY RESIN PREPARATION +<br/> The recipe for the epoxy resin was quite simple, it was enough to proportion the two ingredients: 2 parts of resin 1 parts of hardener -I mixed them well paying attention to wear gloves and immediately impregnate materials. +I mixed them well paying attention to wear gloves, the solution is quite dense, almost odorless and colorless. Has some air bubbles. I immediately impregnated the reinforcement materials: in this case I chose to experiment with felt weaving (always in double layer) and drying them under pressure. On the other side I used simple sheets of felt (synthetic and animal fiber miked) placed on a hemisphere to obtain a shape.I chose the vacuum bag to dry the composite which again didn't work :( <br/> ## Comparing experiments Lorem ipsum