diff --git a/docs/assignments/week09.md b/docs/assignments/week09.md index f6e24da83a1a0def94d7ae15c309fb824a6d7970..eb2b0cf02a9243613e4971ce318dc8c2a9e9cac8 100644 --- a/docs/assignments/week09.md +++ b/docs/assignments/week09.md @@ -242,10 +242,10 @@ Bea and I shared a batch of Bio-resin. The recipe we used was enough for both ou Then I started doing the layup by pouring a few table spoons of bioresin over the top, and massaging and molding it in with my fingers. It set incredibly fast! I felt it solidifying in my hand so I had very little time. I'm not sure how this will pan out. -** -** -** -** + + + +*The lay-up process, Loes Bogers 2019* I finally vacuum sealed the whole thing in a vacuum bag and sucked the air out of it with a vacuum cleaner. Unfortunately the vacuum did not hold at all. I think it's because I mounted the mold onto a cardboard box to tension the cling film over it. I think it's impossible to vacuum the box. I tried about ten times but it kept going out of vacuum. Then I decided to take another route. So I took off the bag and the extra layers to let the resin airdry faster. In that case I might be able to use the mold again tomorrow. It was nice to see that the bleeder did its job and soaked up some of the excess bioresin.