From e127c3d8dcf65204f36bd89a0ad3640d9db740a5 Mon Sep 17 00:00:00 2001 From: Jessica Stanley <jessica.g.stanley@gmail.com> Date: Thu, 27 Jun 2019 20:56:00 +0000 Subject: [PATCH] Week 9 finished --- docs/projects/project_diary/week09.md | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/docs/projects/project_diary/week09.md b/docs/projects/project_diary/week09.md index 22132fe..16e13e8 100644 --- a/docs/projects/project_diary/week09.md +++ b/docs/projects/project_diary/week09.md @@ -41,11 +41,14 @@ I decided I'd also like to have the underside of each module show: ## Amp I built a prototype soft amp module: + +It worked ok, but I decided that the jack socket really needed to be soldered to a few pieces of wire rather than just sewn in, to make it more secure. ## XOR breakout I also stitched a breakout for an XOR module, which looked like this: + But I didn't get as far as actually testing it. @@ -54,3 +57,5 @@ But I didn't get as far as actually testing it. ## More soft potentiometers This week I also tested a new design for a potentiometer. The image below shows a very rough prototype. A strip of conductive fabric is placed on top of a piece of non-conductive fabric, secured at one end, and held loosely in place in the middle and other end by fabric loops. By pulling the unsecured end of the strip, you reduce the amount of conductive fabric that's between point A and point B - it should work as a variable resistor! + + -- GitLab