diff --git a/docs/group_assignments/group2/assets/assignment5/Ender3pro_formlabsform.jpg b/docs/group_assignments/group2/assets/assignment5/Ender3pro_formlabsform.jpg new file mode 100644 index 0000000000000000000000000000000000000000..5340f39c5a666843c57e081759ff9041d38f9f98 Binary files /dev/null and b/docs/group_assignments/group2/assets/assignment5/Ender3pro_formlabsform.jpg differ diff --git a/docs/group_assignments/group2/assets/assignment5/Raise3dpro2.jpg b/docs/group_assignments/group2/assets/assignment5/Raise3dpro2.jpg new file mode 100644 index 0000000000000000000000000000000000000000..53331daf08ac24b56c95f0bdcfa0bd3bdd4d5077 Binary files /dev/null and b/docs/group_assignments/group2/assets/assignment5/Raise3dpro2.jpg differ diff --git a/docs/group_assignments/group2/assignment5.md b/docs/group_assignments/group2/assignment5.md index 95ebc31673a1f01511939d918e33d4d141521041..7b594316e5ef93efb5f11cc02615ae7cf636c277 100644 --- a/docs/group_assignments/group2/assignment5.md +++ b/docs/group_assignments/group2/assignment5.md @@ -93,5 +93,13 @@ We used this [test model](https://www.thingiverse.com/thing:1363023) to compare |Printing Precision|+-0.1mm|0.01-0.25 mm|0.1-0.05mm|+-0.127mm|  +Figure: There was some "spaghetti" like structure below the overhang in the test piece printed by Fortus 380 mc, when the overhang was nearly horizontal.  +Figure: There were some strings between structures in the test piece printed by Fortus 380 mc. + + +Figure: In the test piece printed by the Raise 3d pro2 ther was roughness below the overhang when the angle was nearly horizontal + + +Figure: The test pieces printed by Ender 3 pro and Formlabs Form.