Commit bf100a59 authored by joshwinemmanuel's avatar joshwinemmanuel
Browse files


parent 2eb67873
Pipeline #325426 passed with stage
in 56 seconds
......@@ -721,21 +721,24 @@ EnduroMAX pump technology delivers the highest nozzle horsepower in the industry
- Environmentally “green” system with quiet and clean operation with low electrical consumption
- Rapid Water Level Control for quiet and clean submerged cutting
- Highly robust and reliable pump design capable of over 1000 hours between maintenance.
## Setting Up Machine
## Setting up Machine
<img class="zoomD" src="../../images/wildcard/omax/photo1658386596.jpeg" alt="saftyshe" style="width:100%;">
machine have mainly <b>3 parts</b> a <b>water treatment unit</b> wich filters the water from imputities and cancels out the conductivity of the water to zero.<b>Water cooling unit</b> which basically act as a coolent to the machining and recycles the used water to conserve the use of water. Finally the <b> Water Jet Machine</b> machine uses high pressure water and abrasives if needed to cut the work.
### Water Treatment System
turn on the machine filtering unit keep the switch position in auto. turn on the voltmeter and doser. make sure there is no warning indicatoers are lighted, check the pressure gauges and water levels. Wait for the <b>cunductivity</b> to reduce to<b> zero</b>.
<img class="zoomD" src="../../images/wildcard/omax/photo1658584445.jpeg" alt="saftyshe" style="width:60%;">
### Water Cooling Unit
Check the power supply. Set the temprature in the disply dial. Wait for the <b>temprature</b> to reduce below<b> 16°C</b>.<b> turn on</b> the<b> pump</b> and<b> compressor</b>.
<img class="zoomD" src="../../images/wildcard/omax/photo1658794109.jpeg" alt="saftyshe" style="width:60%;">
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment